Bitfenix Phenom Micro-ATX - Corsair H100i

[RazorStorm]

Is it possible to fit the corsair h100i anywhere in the bitfenix phenom matx case. i would prefer not to mod the case much and not have it be external or take way from the aesthetics of the case. please leave a straight forward answer yes or no and where in the case it will fit, if it does.

this is the system i plan to put in it
Computer Components
Case --> Bitfenix Phenom Micro-ATX
RAM --> Dominator® Platinum with Corsair Link Connector — 1.5V 8GB Dual Channel DDR3 Memory Kit (CMD8GX3M2A1600C8) x2
Motherboard --> Asus Maximus VI Gene
CPU --> Intel Core i7-4770K Processor
Graphics Card --> ASUS GeForce GTX 780Ti DirectCU II OC x2
Power Supply --> AX860i Digital ATX Power Supply — 860 Watt 80 PLUS® Platinum Certified Fully-Modular PSU
SSD --> Intel SSD 520 Series 240GB 2.5in SATA III 6Gb/s
Hard Drive --> Western Digital Black 3TB
Operating system --> Windows 8

Cooling
CPU Cooler --> Hydro Series™ H100i Extreme Performance CPU Cooler
120mm Fans --> Corsair Air Series SP120 PWM High Performance Edition High Static Pressure Fan x4
140mm Fans --> Corsair Air Series AF140 Quiet Edition High Airflow 140mm Fan Fan
Fan Splitter --> BitFenix 3-Pin Fan Splitter Male to 3x Female 3-Pin 60CM RED/BLACK

thanks in advance

 

[Rammy]

Straightforward answer - no.
It is 240mm rad compatible, but not with an SLI setup. There are also potential conflicts with an ODD. It's possible you could top-mount, but it'd be very messy, inefficient, and you still might not be able to do push-pull.

If you want to run a setup like this, you are better off with a Corsair 350D or Fractal Design Arc Mini. If you want something fairly Bitfenix-y, then the Aerocool DS should fit the stuff you need.

 

[RazorStorm]

Straightforward answer - no.
It is 240mm rad compatible, but not with an SLI setup. There are also potential conflicts with an ODD. It's possible you could top-mount, but it'd be very messy, inefficient, and you still might not be able to do push-pull.

If you want to run a setup like this, you are better off with a Corsair 350D or Fractal Design Arc Mini. If you want something fairly Bitfenix-y, then the Aerocool DS should fit the stuff you need.

what about if i used another corsair all in one liquid cooler. e.g the corsair h80i. also thanks for the great answer.

 

[Rammy]

Yeah you should be able to fit that in, though it's still not going to be amazing. At the end of the day, the Bitfenix mATX cases are a bit of a bodge, and have some pretty rubbish characteristics because of it, and there isn't really a away to get around that. I'd be particularly hesitant about trying to do SLI in one because it more or less removes the option to have an optical disk (not a problem for you), and the provison for airflow to graphics cards is really lacking. Any compact SLI setup with non-reference cards is going to be fairly tricky as you will get awkward airflow, and I'm pretty confident the Phenom will exacerbate this.
If you do go with that sort of setup, this is roughly how it will look but you won't have the space between the graphics cards due to the motherboard you picked.

In addition to the cases I suggested first time, there's also the Silverstone SG09/10 which have 3 fans which basically blow right into the graphics cards which is likely to make it pretty great for compact SLI (though the reference design cards are probably still preferable).

 

[RazorStorm]

thanks, i think ill go with the 350d instead. thanks for the help, i rarely get an answer as good as this