Bitlocker encryption was failed at 50%

[yashwanthmoturi001]

when I want to protect my pendrive i have started to enable the bitlocker but it has failed by an error at 50% and i am entering right password and key it was showing as wrong , so please help me to recover my pen drive by formating
the data in drive is not much important

 

[hang-the-9]

Since it failed, not likely you can get into it. Run diskpart command, then "list disk" to show the drives, do a "select disk X" where X is that USB stick, then "clean" command to wipe it. Make sure you select the right disk number.

 

[yashwanthmoturi001]

Since it failed, not likely you can get into it. Run diskpart command, then "list disk" to show the drives, do a "select disk X" where X is that USB stick, then "clean" command to wipe it. Make sure you select the right disk number.

I have done many solutions along with this too but no use

 

[hang-the-9]

Since it failed, not likely you can get into it. Run diskpart command, then "list disk" to show the drives, do a "select disk X" where X is that USB stick, then "clean" command to wipe it. Make sure you select the right disk number.

I have done many solutions along with this too but no use

Then toss it and get another one or contact the vendor support for warranty if it's in warranty