I'm sorry if this is in the wrong place.
My specs are:
CPU: i7-8700k
Motherboard: ROG Maximus X Hero Wi-Fi AC
RAM: 2x8 GB DDR4 Vengeance 3200mhz
HDD/SSD: 970 EVO plus nvme M.2 1TB
GPU: EVGA Nvidia 1080Ti
PSU: EVGA 850W 80 Gold
I installed a Windows update and after it completed, there was response from the computer. The Q-code on the motherboard was A0, which should mean everything is fine but there was no display.
I tried reseating everything (CPU, RAM, GPU, hard drives, M.2 drive). I also unplugged all of my hard drives. Since that didn't solve it, I then tried connecting my computer to a known working display with only the CPU attached and the M.2 drive to boot off of. Again, no display. After removing the M.2 drive and putting in a bootable USB drive, there is still no display but the Q-code changed to A9. This should mean the computer is booting into the bios but the display shows nothing. Not even integrated graphics are working.
What should I do to solve this?
My specs are:
CPU: i7-8700k
Motherboard: ROG Maximus X Hero Wi-Fi AC
RAM: 2x8 GB DDR4 Vengeance 3200mhz
HDD/SSD: 970 EVO plus nvme M.2 1TB
GPU: EVGA Nvidia 1080Ti
PSU: EVGA 850W 80 Gold
I installed a Windows update and after it completed, there was response from the computer. The Q-code on the motherboard was A0, which should mean everything is fine but there was no display.
I tried reseating everything (CPU, RAM, GPU, hard drives, M.2 drive). I also unplugged all of my hard drives. Since that didn't solve it, I then tried connecting my computer to a known working display with only the CPU attached and the M.2 drive to boot off of. Again, no display. After removing the M.2 drive and putting in a bootable USB drive, there is still no display but the Q-code changed to A9. This should mean the computer is booting into the bios but the display shows nothing. Not even integrated graphics are working.
What should I do to solve this?
Last edited: