Question Black Screen after trying to overclock ram

Feb 7, 2021
2
0
10
I have tried to overclock my rams but after saving and exiting bios i couldn't boot. Fans are spinning at %100. I tried to remove the cmos battery and waited overnight but after I replaced the battery it still didn't work. When I power up the computer mouse and keyboard's lights are okay but there is no output in monitor I have tried monitor on another computer. Monitor works fine. I reseated the memories and try to boot up with just one memory but it didn't work. I use Asus B450M Dragon motherboard and there is CLRTC with 2 pins I tried to touch the pins with screwdriver but I don't know I could did it successfully or not but even I tried multiple times It still doesn't boot. What can I do about it?
 
Welcome to the forums, newcomer!

Make and model of the rams used on your platform? Can you Also mention the processor you're using on the board? Check and see which BIOS version you(are or were) on prior to attempting the overclock on your ram. To clear your CMOS, all you need to do is power down the system, disconnect from the wall and remove the CMOS battery from the motherboard. Replace the battery after 30 minutes and then go into BIOS.

Make and model of your PSU and it's age(if it's used)?
 
  • Like
Reactions: furkangoktas
Welcome to the forums, newcomer!

Make and model of the rams used on your platform? Can you Also mention the processor you're using on the board? Check and see which BIOS version you(are or were) on prior to attempting the overclock on your ram. To clear your CMOS, all you need to do is power down the system, disconnect from the wall and remove the CMOS battery from the motherboard. Replace the battery after 30 minutes and then go into BIOS.

Make and model of your PSU and it's age(if it's used)?

I was using the latest beta version of my bios which is "B450M-DRAGON BIOS 2803"

I have tried to remove CMOS battery from the motherboard and replace it after 30 minutes at least 10 times I even waited 6-8 hours but results are same pc doesn't boot.

I bought the PC 4 months ago but I don't know my PSU as its built in with the case but It says it is 80+ Bronze 650 Watt

My processor is Ryzen 5 3500

My rams are Adata XPG Gammix D30 3200mhz cl16 "AX4U320038G16A-SB30" and I tried to overclock with these settings
nLwga37.png
2BnpcZ2.png
 
Last edited: