Black Screen while installing Amd drivers on R7 265

[Utkarsh Mahajan]

I was playing csgo and suddenly there was a black screen on the monitor and it didn't go. So i tried restarting my pc then my monitor went to power saver mode and no signal from my monitor. So i tried using different vga cable to connect to my monitor. still it didn't work out. So i connected my pc with my Tv with hdmi. And i got it to boot up but after win 10 loading, i got black screen. so i went to safe mode and uninstalled drivers with ddu. and tried installing latest amd drivers. and then i got black screen again while installing. so i repeated and tried different versions of drivers with no results. So i tried re plugging my gpu but it didn't work too. I removed my gpu and then tried to connect with my monitor and my monitor worked. I had thought monitor had some fault too. Does it mean that my card is dead?

I had overclocked the card for few months with no problems.

I want to know if there is any fix for this except that oven method. my card is not in warranty. Can i get it repaired from Sapphire ? do they have services in India?

 

[scout_03]

you gpu is out if you could not install the driver and everything work with onboard you might have gone to far on the overclock it time for a new one.

 

[Utkarsh Mahajan]

you gpu is out if you could not install the drvire and everything work with onboard you might have gone to far on the overclock on it time for a new one.

It worked well for months. never got any problems. I had took a screenshot of the overclocks. my temps were fine too. 🙁
I have this card from only 2 years.

 

[scout_03]

that is a new picture with the gpu or old one you did have on hand .

 

[Utkarsh Mahajan]

I found that i have overclocked it for just 3 months. not much, i thought it would be much . i took it one day just to make sure if the clocks were fine.

 

[scout_03]

so from today could you have similar picture with date on .

 

[Utkarsh Mahajan]

my screen gets black while installing gpu drivers. So i cant even get to the radeon settings. Is there anyway i can fix out the issue? my gpu works without drivers.

 

[scout_03]

no it work on generic you keep it this way or get a new one check for the warranty you could be able to rma it .

 

[Utkarsh Mahajan]

i am unable to find the warranty period for my card. i got an used one from ebay 2years ago. he bought it in 2014.

 

[scout_03]

then your out of luck you will have to buy a new one .

 

[Finstar]

It could be an old bitcoin mining card sold after it became non profitable to gpu mine which would explain why it failed so early.
Anyway, your gpu is dead and what you're seeing before installing the drivers is what your cpus igpu is running.
You'll need a new gpu now. Preferably a new one and not used.

 

[Utkarsh Mahajan]

If i try using Oven method. Will that work? i will try using the gpu tomorrow again. 🙁 i know its dead but i can't give up

 

[scout_03]

finger cross let hope it work .

 

[Utkarsh Mahajan]

It could be an old bitcoin mining card sold after it became non profitable to gpu mine which would explain why it failed so early.
Anyway, your gpu is dead and what you're seeing before installing the drivers is what your cpus igpu is running.
You'll need a new gpu now. Preferably a new one and not used.

I have my igpu disabled. 🙁

 

[scout_03]

in bios got to enable it using the gpu on system before removing it that all in board user manual .

 

[Utkarsh Mahajan]

in bios got to enable it using the gpu on system before removing it that all in board user manual .

i did enable gpu in bios before removing the gpu.

 

[scout_03]

you made it as fisrt video device .

 

[Utkarsh Mahajan]

Gpu is dead anyways. there is an other issue with this. when the gpu is connected to my monitor, it shows no display even at boot while it does when connected to TV. Why is this happening?

Does the oven method work if an overclock has caused the death of a gpu (Thats what i think).

 

[scout_03]

you could try but might not work .