Blank Screen on boot, cannot access bios

[BomberF35]

I built a pc with a Gigabyte GA-H110M-A, and when I boot it, it shows a black screen (not a no signal screen) and I cannot access the bios, but all fans spin. I couldn't install an operating system onto it because I cannot access bios.

 

[Ironsounds]

Hello... a New Intel build will default the graphics from the CPU/GPU/igfx and the MB Video Outputs on first boot and until a BIO's setting is changed for an Exterior GPU use.

1) remove any Video card and connect to the MB and set your monitor for the cable/input used on it... for the next BOOt.

 

[BomberF35]

How do I enable the other GPU? when I insert it I cannot get to bios

 

[Ironsounds]

Hello... it is typically under "peripherals" in the BIO's "Int display" and internal graphic settings "IGFX, PCIe slot1, slot 2, slot 3, PEG or both"... (save&exit) this has to be done using the CPU/GPU/IGFX and MB output/connection display first.