[SOLVED] Blank Screen on Loading BIOS

[Connor_w]

So my motherboard is a Gigabyte B550 Aorus Elite AX V2, i have downloaded windows, and everything seems to be working fine however when i try to load bios i just have a blank screen on my second monitor and my first monitor says it has no signal. I dont know what to do, any help would be appreciated thanks.

 

[jay32267]

I would try one monitor at a time.
I have had trouble with the BIOS displaying using two monitors on rare occasions.

 

[Connor_w]

I would try one monitor at a time.
I have had trouble with the BIOS displaying using two monitors on rare occasions.

Even with one monitor it still doesnt show anything, no matter which monitor i try

 

[jay32267]

but it works totally fine otherwise....except when you try and go to the BIOS correct?
Can you try different graphics ports?
Reset the BIOS?

 

[Connor_w]

but it works totally fine otherwise....except when you try and go to the BIOS correct?
Can you try different graphics ports?
Reset the BIOS?

I only have the cables for dvi and display port and have tried both, it works fine in every other way. I'm not sure how I would go about resetting the BIOS

 

[jay32267]

I only have the cables for dvi and display port and have tried both, it works fine in every other way. I'm not sure how I would go about resetting the BIOS

To reset the BIOS....you can power down and take the CMOS battery out of the motherboard for a few minutes and then put it back in.
There might also be a jumper on the MB that does the same thing.
Your manual will tell you......but removing the battery works fine.