Windows shows problems if there is a change in SATA-Controller Software or Controller Speed (AHCI < - > Legacy, 3G < - > 6G) It could be that the Upgrade changed the setting there.
Windows shows problems if there is a change in SATA-Controller Software or Controller Speed (AHCI < - > Legacy, 3G < - > 6G) It could be that the Upgrade changed the setting there.
go into the bios hit reset to factory default. save and reboot back into the bios. under the ai tab make sure ram set to xmp profile. on the main bios page make sure the mb set to standard not performace mode.