Blue screen on fresh install

[leeelemon]

I downloaded media creation tool with windows 10 to make boot usb

I began install on ssd and entered my windows key. It got stuck on the loading spiral screen for an hour. I restarted, assuming something was broken.

I tried again a couple of times. I clicked I don't have a windows key these times. The installation goes through like normal and reboots itself.
Then it blue screens with stop code and error ending in 21a.

I got a brand new computer with
ryzen 5
Gigabyte ab350 gaming 3
Gigabyte Gtx 1070
Corsair vengeance 8gb 2666
SanDisk ssd

I've tried a few different things, but none have worked. Im hoping someone may have come across this issue before. Any suggestions would be appreciated.

 

[axe0axe0]

Not knowing what you've tried besides a few install attempts:
Either your RAM or SSD is bad.
- If possible seat the RAM in a different system that has no problem, if the system has problems the RAM is bad.
- If not possible, run MemTest86+, https://www.tenforums.com/tutorials/14201-memtest86-test-ram.html
- If MemTest86+ does not return errors, try to install Windows on a different hard drive.

 

[leeelemon]

Not knowing what you've tried besides a few install attempts:
Either your RAM or SSD is bad.
- If possible seat the RAM in a different system that has no problem, if the system has problems the RAM is bad.
- If not possible, run MemTest86+, https://www.tenforums.com/tutorials/14201-memtest86-test-ram.html
- If MemTest86+ does not return errors, try to install Windows on a different hard drive.

You were right my brand new RAM must be faulty. I was able to borrow some ram from another computer and windows installed perfectly.

Thanks heaps