Blue Screen on New Pc Build

DilawU

Distinguished
Dec 15, 2013
143
0
18,680
Hi, I just finishied my pc build and I keep reciveing blue screen. Why ?
Specs :
Motherboard : ASRock 970 PRO3 R2.0
CPU : FX-6300
GPU : ASUS R9 270 DirectCU II
Memory : Corsair Vengeance 4GB DDR3 1600MHz CL9 Rev. A ( 1 x 4 )
HDD : WD10EZEX
PSU : Sirtec High Power Plus 500W

I have the lastest GPU driver.
I have the lastest Audio driver.
I have the lastest Bios Update.
 
Solution


Well any stability test are out of the question since the crashes seem to be random...

I think the only option here is to replace your parts one by one (borrow parts from your friends if you can) and see what helps. I'd say the first thing to try is the PSU since it's a poor quality one and should be replaced even if it was working.
Is there any more information about the bluescreen you could provide? Such as what you are doing at the time, what the blue screen actually says and the information from the event viewer?
 
The error looked like this : A problem has been detected and windows has been shut down to prevent damage to your computer

If this is the first time you've seen this stop error screen restart your computer. If this
screen appears again, follow these steps:

Check to be sure you have adequate disk space. If a driver is identified in the stop message,
disable the driver or check with the manufacturer for driver updates. Try changing video adapters.

Check with your hardware vendor for any BIOS updates. Disable BIOS memory options such as caching
or shadowing. If you need to use safe Mode to remove or disable components, restart your computer,
press f8 to select advanced startup options, and then select safe mode.

Technical information:

*** STOP: 0x0000001E (0x0000000000000000, 0x0000000000000000, 0x0000000000000000, 0x0000000000000000)

But it's not the first time when i get it.
 
another one a moment ago.
A clock interrupt was not received on a secondary processor within the allocated time interval.
0x00000101 (0x0000000000000021,0x0000000000000000,0xFFFFF88003165180,0x0000000000000002)
 


Did you install Windows on the HDD while it was in this PC or was Windows installed before the HDD was plugged in?
 


i tried like 5 windowses.i even tried windows 8.1.same thing...

how can i find what hardware is faulty?

 


Well any stability test are out of the question since the crashes seem to be random...

I think the only option here is to replace your parts one by one (borrow parts from your friends if you can) and see what helps. I'd say the first thing to try is the PSU since it's a poor quality one and should be replaced even if it was working.
 
Solution