Blue screen windows 7

[c.constantin2687]

Hello guys i get this blue screen when just browsing on the internet, i ckecked my hardware reinstaled my win but still happens

my hardware is cpu ryzen 1700, msi b350 pc mate , 8gb corsair (1stick), gt 630, ssd kingston, win 7

i have instaled all the lastest drivers

here is the dump, pls help and sorry for my english

Kernel base = 0xfffff800`03217000 PsLoadedModuleList = 0xfffff800`03459750
Debug session time: Thu Nov 9 22:06:13.558 2017 (UTC - 5:00)
System Uptime: 0 days 0:42:36.570
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If kernel debugger is available get stack backtrace.
Arguments:
Arg1: 0000000000000064, memory referenced
Arg2: 000000000000000b, IRQL
Arg3: 0000000000000001, value 0 = read operation, 1 = write operation
Arg4: fffff88000f31d4b, address which referenced memory

Debugging Details:
------------------

TRIAGER: Could not open triage file : e:\dump_analysis\program\triage\modclass.ini, error 2

WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff800034c3100
GetUlongFromAddress: unable to read from fffff800034c31c8
0000000000000064 Nonpaged pool

CURRENT_IRQL: b

FAULTING_IP:
pci!memset+2b
fffff880`00f31d4b 488910 mov qword ptr [rax],rdx

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

BUGCHECK_STR: 0xD1

PROCESS_NAME: System

TRAP_FRAME: fffff880031b1840 -- (.trap 0xfffff880031b1840)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000064 rbx=0000000000000000 rcx=0000000000000004
rdx=0000000000000000 rsi=0000000000000000 rdi=0000000000000000
rip=fffff88000f31d4b rsp=fffff880031b19d8 rbp=0000000000000002
r8=0000000000000048 r9=0101010101010101 r10=0000000000000000
r11=fffff880031b1950 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei pl nz na po nc
pci!memset+0x2b:
fffff880`00f31d4b 488910 mov qword ptr [rax],rdx ds:00000000`00000064=????????????????
Resetting default scope

LAST_CONTROL_TRANSFER: from fffff800032873a9 to fffff80003287e00

STACK_TEXT:
fffff880`031b16f8 fffff800`032873a9 : 00000000`0000000a 00000000`00000064 00000000`0000000b 00000000`00000001 : nt!KeBugCheckEx
fffff880`031b1700 fffff800`03286020 : 00000000`00000001 00000000`00000007 fffffa80`07486d1c 00000000`0000004c : nt!KiBugCheckDispatch+0x69
fffff880`031b1840 fffff880`00f31d4b : fffff880`00f2eb0c 00000000`00000001 fffff880`00000023 fffffa80`074867f0 : nt!KiPageFault+0x260
fffff880`031b19d8 fffff880`00f2eb0c : 00000000`00000001 fffff880`00000023 fffffa80`074867f0 00000000`00005555 : pci!memset+0x2b
fffff880`031b19e0 fffff880`00f2e5f6 : 00000000`00000000 fffff880`031b1b30 fffffa80`07498f00 fffff880`031b1ab0 : pci!ExpressRootPortAerInterruptRoutine+0x1bc
fffff880`031b1a40 fffff800`03283c5c : fffff880`03189180 fffff880`031b1b30 fffffa80`07498f00 fffffa80`06777601 : pci!ExpressRootPortInterruptRoutine+0x36
fffff880`031b1ab0 fffff800`0327fae2 : fffff880`03189180 fffff880`00000001 00000000`00000001 fffff880`00000000 : nt!KiInterruptDispatch+0x16c
fffff880`031b1c40 00000000`00000000 : fffff880`031b2000 fffff880`031ac000 fffff880`031b1c00 00000000`00000000 : nt!KiIdleLoop+0x32


STACK_COMMAND: kb

FOLLOWUP_IP:
pci!memset+2b
fffff880`00f31d4b 488910 mov qword ptr [rax],rdx

SYMBOL_STACK_INDEX: 3

SYMBOL_NAME: pci!memset+2b

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: pci

IMAGE_NAME: pci.sys

DEBUG_FLR_IMAGE_TIMESTAMP: 4ce7928f

FAILURE_BUCKET_ID: X64_0xD1_pci!memset+2b

BUCKET_ID: X64_0xD1_pci!memset+2b

 

[Greg Gregorich]

ryzon not fully supported Windows 7 :https://www.anandtech.com/show/11182/how-to-get-ryzen-working-on-windows-7-x64

 

[c.constantin2687]

ryzon not fully supported Windows 7 :https://www.anandtech.com/show/11182/how-to-get-ryzen-working-on-windows-7-x64

tnx for your reply but thats not the answer im looking for

 

[c.constantin2687]

i found whats the problem my gpu driver, i uninstaled my latest driver from nvidia and instaled the one from cd i got with the card, with this one keeps crashin right when windows starts, then i instaled one newer from internet from asus website (not the latest), with this driver no crashes for 2 hours now hope this solves the problem if not im going to buy a new gpu, any advice i want to buy a 1050 but im afraid this hapens again with ryzen, are radeon drivers more stabile?

 

[c.constantin2687]

hapen again im going to buy a new gpu any advice between nvidia 1050 or radeon rx 560?

here is the dump

Windows 7 Kernel Version 7601 (Service Pack 1) MP (16 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.23915.amd64fre.win7sp1_ldr.170913-0600
Machine Name:
Kernel base = 0xfffff800`03204000 PsLoadedModuleList = 0xfffff800`03446750
Debug session time: Fri Nov 10 13:48:24.671 2017 (UTC - 5:00)
System Uptime: 0 days 1:36:44.780
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If kernel debugger is available get stack backtrace.
Arguments:
Arg1: 0000000000000064, memory referenced
Arg2: 000000000000000b, IRQL
Arg3: 0000000000000001, value 0 = read operation, 1 = write operation
Arg4: fffff88000f70d4b, address which referenced memory

Debugging Details:
------------------

TRIAGER: Could not open triage file : e:\dump_analysis\program\triage\modclass.ini, error 2

WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff800034b0100
GetUlongFromAddress: unable to read from fffff800034b01c8
0000000000000064 Nonpaged pool

CURRENT_IRQL: b

FAULTING_IP:
pci!memset+2b
fffff880`00f70d4b 488910 mov qword ptr [rax],rdx

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

BUGCHECK_STR: 0xD1

PROCESS_NAME: dllhost.exe

TRAP_FRAME: fffff8800ca2b870 -- (.trap 0xfffff8800ca2b870)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000064 rbx=0000000000000000 rcx=0000000000000004
rdx=0000000000000000 rsi=0000000000000000 rdi=0000000000000000
rip=fffff88000f70d4b rsp=fffff8800ca2ba08 rbp=0000000000000002
r8=0000000000000048 r9=0101010101010101 r10=0000000000000000
r11=fffff8800ca2b980 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei pl nz na po nc
pci!memset+0x2b:
fffff880`00f70d4b 488910 mov qword ptr [rax],rdx ds:00000000`00000064=????????????????
Resetting default scope

LAST_CONTROL_TRANSFER: from fffff800032743a9 to fffff80003274e00

STACK_TEXT:
fffff880`0ca2b728 fffff800`032743a9 : 00000000`0000000a 00000000`00000064 00000000`0000000b 00000000`00000001 : nt!KeBugCheckEx
fffff880`0ca2b730 fffff800`03273020 : fffffa80`063c3401 00000000`00000016 fffffa80`07861d1c 00000000`0000004c : nt!KiBugCheckDispatch+0x69
fffff880`0ca2b870 fffff880`00f70d4b : fffff880`00f6db0c 00000000`00000001 00000000`00000023 fffffa80`078617f0 : nt!KiPageFault+0x260
fffff880`0ca2ba08 fffff880`00f6db0c : 00000000`00000001 00000000`00000023 fffffa80`078617f0 fffff880`0ca2bae0 : pci!memset+0x2b
fffff880`0ca2ba10 fffff880`00f6d5f6 : 00000000`00000000 fffff880`0ca2bb60 fffffa80`07881f00 00000980`00000000 : pci!ExpressRootPortAerInterruptRoutine+0x1bc
fffff880`0ca2ba70 fffff800`03270c5c : 00000000`00000063 00000000`0461d000 fffffa80`07881f00 00000000`0461d001 : pci!ExpressRootPortInterruptRoutine+0x36
fffff880`0ca2bae0 000007fe`ea122725 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiInterruptDispatch+0x16c
00000000`03b9f538 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x7fe`ea122725


STACK_COMMAND: kb

FOLLOWUP_IP:
pci!memset+2b
fffff880`00f70d4b 488910 mov qword ptr [rax],rdx

SYMBOL_STACK_INDEX: 3

SYMBOL_NAME: pci!memset+2b

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: pci

IMAGE_NAME: pci.sys

DEBUG_FLR_IMAGE_TIMESTAMP: 4ce7928f

FAILURE_BUCKET_ID: X64_0xD1_pci!memset+2b

BUCKET_ID: X64_0xD1_pci!memset+2b

 

[Dante4]

Since i have same problem i found tempory solution as reinstall your GPU to different Pci slot.

Nvm, that doesn't works. So far i tried:
Change PCI-E slot
Change memory slot
Reset Bios
Update Bios
Overcloak everything to max (4 GHz CPU, 3 GHz memory 15-15-15-30)
Downclock everything to min (3 GHz CPU, 1.8 GHz memory)
Reinstall OS
Reinstall driver (LAN, chipset, video)
Install old video driver

I did 3Dmark (both extreme and normal), Cinebench, memtest64 (40 loops), Video memory stress test (5 full loops), EVGA OC Scanner (30 mins on Furry E (GPU memory burner::3072MB)).
NOT. A. SINGLE. CRASH.

But after 5-10 mins in MikuMikuDance my PC crashes with D1 error.

P.S. Problem started after i change Air cooling to water cooling. After i change it back..nothing changed. I was still getting BSOD, so i removed all fans except cpu. No change.

Got new GPU, no change.

 

[c.constantin2687]

glad someone reply this forum is dead

i found a temp solution lower your ram MHz from bios, i lower it from 2400 to 2100 or something like that and now i only get this error maybe once on 2 months witch is much better than before when i got it 2-3 times a day

maybe is from my win or unstable bios or ram who knows

sorry for my bad english