Bluescreen memory_management

[amoranis]

Hello,
Well i found out what was wrong with my RAM. I am down to 4 gigs and ran memtest with a few passes and no errors in any slots.

I have a new problem though. I am now getting MEMORY_MANAGENENT blue screens.


Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 1a
BCP1: 0000000000041287
BCP2: 0000000000000000
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\021512-10108-01.dmp
C:\Users\Jose\AppData\Local\Temp\WER-12760-0.sysdata.xml

Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

The event name was RADAR_PRE_LEAK_WOW64

Specs:

i5 2500k 3.3 (overclocked to 3.7 by company)

Super Talent 8GB 1600 ram (clocks were set at 11-11-11-28 in the bios i think) (also down to 1 stick of 4GB since one had very many errors that was causing other problems.)

Corsair 120 GB Hardrive

Seagate 1TB hard drive

EVGA GTX 570HD superclocked

Xtremegear 800 W Power supply

ASUS P8Z68-V LX MoBo

FA-WATER-111 CYBERPOWER 360 WATER COOLER KIT

I have no clue what the problem could be this time. Any help would be appreciated.

 

[amoranis]

A few passes? did memtest reun for more than 12 hours? 24 would be better noting that you are having memory problems?... check your voltages as well.

Passes said 7 when i woke up on the good stick. Also ran Windows Memory Diagnostic on it and it also said no problems. When i first got it the clocks were set at 11-11-11-28-2T

Here is some info from my other thread about cpu-z stuff that i wrote down the other day and posted in my previous thread.

JEDEC #5 10-10-10-27-37 1.5V
JEDEC #6 11-11-11-30-41 1.5V
XMP1600 9-9-9-28-37-2T 1.65V
XMP1600 9-9-9-28-37-2T 1.5V

BUS 100 MHZ
Multiplier 16.0
Core 1600.3


PC3- 12800 (800MHZ)

I went ahead with a suggestion that was said in that thread and put the clocks at 9-9-9-28 and that was when i had this latest bluescreen with MEMORY_MANAGEMENT and the event RADAR_PRE_LEAK_WOW64. Now they are back to auto and cpuz is reading this with the 1 good stick of RAM that i have:

SPD Tab reads:
J#5 761 MHz/10-10-10-27-37 1.50V
J#6 838 MHz/11-11-11-31-41 1.50V
XMP1600 800MHz/9-9-9-28-37-2T 1.650V
XMP1600 800MHz/9-9-9-28-37-2T 1.50V

I can never change that voltage that says 1.65 even if i change the setting from auto to 1.5

Right now the memory tab reads:

DRAM Frequency: 802.7
FSBRAM: 1:6
11.0-11-11-28 Command Rate:2T