Board Unresponsive After Windows 10 Install

[potatoomg]

I attempted to install windows 10 from a flash drive. I got a blue screen saying it had issues finding the boot media, and that it would automatically reboot. After letting it do its thing about 10 times I gave up and turned it off. Since then whenever I turn on my pc I can't get my BIOS to show up, or any image for that matter.

I've tried taking out my GPU, and plugging my monitor to the board, but still no results. The pc will turn on, spin the fans for a while, turn off, then on again and so on seemingly forever.

Any ideas?

 

[Paul NZ]

What did you use to extract the ISO to the flash drive?

 

[potatoomg]

The windows media creation tool

 

[Paul NZ]

I would try rufus

Get 2.18. If the mobo is UEFI configure it in the BIOS first. Then select GPT partition in rufus

Then add the ISO. Wait for it to finish. Then reboot / boot from flash drive

I dont think the mediacreation tool is that good for putting the ISO onto a flash drive

If the mobo doesn't support UEFI select MBR partition

 

[potatoomg]

Frankly, I've used rufus on multiple ocasions, this isn't my problem.

There is no point in trying to change my mounting software if there is no way for me to even acess my BIOS. I am completely unable to install anything. I've tried my flash drive with windows 10 and a fresh install of a ubuntu iso with rufus. I am simply not getting an image from my motherboard.

 

[Paul NZ]

What mobo / cpu do you have? Is this a new build, or was Windows on it before?

 

[potatoomg]

I have an I7-3770 with an MSI B75MA-P45 motherboard. It has had windows before. And I've had it for about 5 years.

 

[Paul NZ]

Hmm odd that both the GPU and onboard dont work. Try removing the ram if there's a speaker in the case it should beep

 

[potatoomg]

I use a dedicated GPU, although I already tried using it with onboard graphics. I'm getting the exact same results.

 

[karenjoly]

Put the psu out of its misery.