[SOLVED] Bootable USB not being loaded

Jun 8, 2018
4
0
10
0
I have created a bootable USB with windows media creation tool and have put the USB in my newly built computer. It has a ASRock B450 Pro4 motherboard. The USB will show up in the bios and boot options screen but when the USB is selected to boot the display turns black and doesn't display anything after. I have tried a different USB but that hasn't worked either. I have CSM in the bios turned on, and fast boot turned off. I have also tried putting the USB in all of the USB ports but they all do the same. I cant seem to tell what is the problem. Any help is appreciated.
Thanks
 
Feb 5, 2019
7
0
10
1
Do you have secure boot turned on? If so, it's probably the problem, you can turn it off from BIOS settings. If all else fails, you can always unplug your HDD and it should boot into the USB by default.

Hope this helps :)
 

norcalsc

Respectable
after you downloaded the tool. you need to run it so it installs windows media installer on the USB. then you put into the new build and when you get to bios change the boot priority to the USB it should let you install from there
 
Jun 8, 2018
4
0
10
0

I already have ran it and used the usb. I also have made it the top priority.
 
Jun 8, 2018
4
0
10
0

Ill try this out
 

ASK THE COMMUNITY

TRENDING THREADS