Booting m.2 x16 raid 0

[mrdiljodankish2]

Helppppppppp!!! So first platform specs.
Asus tuff mark 1
Intel 7820 i7 8 core
Asus hyper m.2 ×16 " 4 m.2 pci express card
4 kingston 240 ssd
Nvidia titan 12 gig .
16 gigs ram
I am desperately trying to boot from an array of 4 intel optane in raid 0. I seem to be very confused even with years of building experience. I have followed the tuff mark 1 bios instructions and I'm just not getting it. I have read countless sites to no avail.

 

[MLG_No_Scope]

https://www.youtube.com/watch?v=No-ct8pQcIg

maybe this will work?

 

[mrdiljodankish2]

https://www.youtube.com/watch?v=No-ct8pQcIg

maybe this will work?

I can't get the 4 m.2 in the hyper m.2 x16 pci express card to recognize in the Windows installation

 

[das_stig]

When Windows asks what drive to install too, are you loading the driver and then refreshing, so it can see the raid ?

Although not 100% certain, but do you not need the Intel VROC key to be attached to the motherboard header?

 

[mrdiljodankish2]

When Windows asks what drive to install too, are you loading the driver and then refreshing, so it can see the raid ?

Although not 100% certain, but do you not need the Intel VROC key to be attached to the motherboard header?

 

[mrdiljodankish2]

I do have the vroc key installed wasn't aware that I needed to manually load a driver during Windows installation to view the drive . What driver is it?

 

[mrdiljodankish2]

Bios doesn't even recognize the m.2 raid array. When I try to configure it . It promps me to remove the raid then states that it's a signed to another volume.

 

[mrdiljodankish2]

I can assign the pcislot to hyper m.2 but that's as far as I get

 

[thedrewnorth]

Did you ever get it to work?

My Hyper m.2 Card is gathering dust. Very little info out there. I found if 2 nvme’s Are used, they must be installed in slot 1 & 3.

I was never able to get 3 or 4 NvME’s to even be recognized