[SOLVED] Booting Problem From USB

Status
Not open for further replies.

rehmatpanag

Reputable
May 20, 2015
31
0
4,530
I cannot boot into clover boot loader from USB when I select USB from the boot options it don't do anything just boots me into my windows and I'm trying to install macOS Sierra on my Laptop HP Pavilion dv6 3138tx can anyone have a look at this and then tell me a solution to this problem....
 
Solution
technically it's illegal to install MACOS onto non-Apple hardware so I assume that voids the forum rules? (Moderators help me out).

But, strictly talking about booting USB sticks in general, you have to make sure that the boot device has been created properly or it won't boot.

You have to:
a) make sure to select the USB boot device properly in BIOS (can be a "quick", one-time selection), and
b) boot device must be formatted correctly to be a boot device.

Other:
You may want to try booting other things like MEMTEST86 to figure out where your issue is. If MEMTEST86 boots fine then it's an issue with the software or the way it was applied to create to make it bootable.
technically it's illegal to install MACOS onto non-Apple hardware so I assume that voids the forum rules? (Moderators help me out).

But, strictly talking about booting USB sticks in general, you have to make sure that the boot device has been created properly or it won't boot.

You have to:
a) make sure to select the USB boot device properly in BIOS (can be a "quick", one-time selection), and
b) boot device must be formatted correctly to be a boot device.

Other:
You may want to try booting other things like MEMTEST86 to figure out where your issue is. If MEMTEST86 boots fine then it's an issue with the software or the way it was applied to create to make it bootable.
 
Solution
Status
Not open for further replies.