[SOLVED] bosd and no idea where to start.

[onemoretimex]

keep getting a bsod while gaming... comes up as bosd
WHEA_UNCORRECTABLE_ERROR

and i also get these 3 lines when i open bluescreenview.

hal.dll hal.dll+48188 fffff80467f5c000 fffff80468000000 0x000a4000 0x5c190592 18/12/2018 15:34:58 Microsoft® Windows® Operating System Hardware Abstraction Layer DLL 10.0.18362.752 (WinBuild.160101.0800) Microsoft Corporation C:\Windows\system32\hal.dll
ntoskrnl.exe ntoskrnl.exe+463d60 fffff80468000000 fffff80468ab7000 0x00ab7000 0xd1492ac1 07/04/2081 07:33:37 Microsoft® Windows® Operating System NT Kernel & System 10.0.18362.959 (WinBuild.160101.0800) Microsoft Corporation C:\Windows\system32\ntoskrnl.exe
PSHED.dll PSHED.dll+1920 fffff8046b9a0000 fffff8046b9ba000 0x0001a000 0xb21f9dda 12/09/2064 04:41:14 Microsoft® Windows® Operating System Platform Specific Hardware Error Driver 10.0.18362.1 (WinBuild.160101.0800) Microsoft Corporation C:\Windows\system32\PSHED.dll

Just hoping its not a hardware error as most of my system is relatively new but not so new i may have issues getting returned....

windows 10 64
ASRock B450M-pro4
Amd Ryzen 3 2200g
Corsair CMK16GX4M2B3200C16 Vengeance LPX 16 GB (2 x 8 GB) DDR4 3200 MHz
Corsair CP-9020102-UK CX550M 550 W 80+ Bronze Certified ATX Po Wer Supply Unit

Ran memtest for 4 passes no errors... ive rang it for more in the past with no issues... no malware as i read to test for this too.

 

[piechockidocent9]

Did you oc anything? What's ur current cpu/gpu mhz and voltage? Did you put that ram over 3200mhz via for instance xmp profiles??

 

[onemoretimex]

Did you oc anything? What's ur current cpu/gpu mhz and voltage? Did you put that ram over 3200mhz via for instance xmp profiles??

yes to get the ram to the advertised 3200 i need to run the xmp profile.

cpu is auto as it fluctuates.... and igpu is 1600... my temp even running the games i play never goes above 47c..... and as mentioned ram passes with no issues.

 

[piechockidocent9]

Try reducing ram clocks, 3200 is top theoretical capability of ur motherboard while 2933 for ur cpu. Try the 2933 xmp setting, to know fast run prime95. If you still gets bsod keep going down untill they stop, might be either your mb or cpu are just not up to the task even though the sticks are fine on their own. You could try staying at 3200mhz and change voltage insteaad but I'm not rly experience with ocing ram via anything else than xmp.