Question Bought 2TB Segate burracuda - Having 240gb crusial ssd - 2tb Disappearing

Jun 20, 2020
2
0
10
0
HI guys, This is Avinash.

I am having huge issue, i am getting mad about it, unable to find proper solutions, its not about sata cables at al, most of them guiding me about sata cables. Coming to issue.
Previously i am using 160gb segate hdd, later bought 240gb crusial ssd.
To make my system boot faster i have used ssd as for Win 10 os.
Later in few days my 160gb started disappearing. later in few more days it stopped working and does not detect at all (Left a side)
Now bought 2tb burracuda. As of already ssd having os, used tb as additional hdd and made 3 partation (MBR format).
Within 2 days 2tb started disappearing. always tried to scan Device manager. Still few times it appeared & some times not. later i have watched few youtube videos about this and did as they said. Most of them all about sata cables. Asked to change 6gbps sata cables. so bought 6gbps sata cables and used. tough no change. repeated same issue.
i got idea and did os in 2tb and removed os from ssd,
Next day itself 2tb does not boot, asking ctrl+alt+del. so i tried to do os again.
At this moment the hdd showed me as a new 2tb, all the partations missing and the data gone. ok took lite and tried to do os. but it failed in beginning only. when booting and tried to reinstall. again it showed all 3 partations. really got mad at that moment, happened same 4 to 5 times easily, some times it shows like new 2tb hdd and after fail again it shows all partations. changed 5 sata cables, tough repeated same situation.
later stopped using windows 10 and installed windows 7. Now there it is the issue with windows 10 os i thought.. it worked fine with windows 7 and used ssd as additional hdd.
There the problem started again after 1wk. booting issue again asking ctrl+alt+del. ssd removed and used 2tb worked again few days. later when added ssd for data. it worked. later 2tb stopped again.
I really got mad and stopped using 2tb, now using only ssd.

https://ibb.co/HGQ784d
https://ibb.co/mcbfC7n
https://ibb.co/fFvrQRK
https://ibb.co/Wyn3dGP
https://ibb.co/Dg2FYx1
https://ibb.co/w4hbVf3

Now i would like to trough a problem to you guys, Solve it.
Find the issue and let me know. I am also a hardware. But this issue made me mad. Tried all, removed ram, cleaned all the ports and checked motherboard, cables etc.


My aim is to boot fast, so i need OS in ssd and i would like to use my 2tb as slave

My System config:

H61 ZEB MOTHERBOARD
G645 PENTIUM PROCESSOR,
4GB RAM,
2TB SEGATE HDD,
240GB CRUSIAL SSD,
450W SMPS
USING HDMI CABLE FOR MY 22INCH DELL FULL HD MONITOR
USING PRINTER CONNECTION FOR LBP2900
 
1st - go into BIOS and turn fast boot off.
2nd - why are you running windows installer? Do you intend to install windows on 2TB drive too?
3 - you said, you tried to boot from 2TB drive. Why? There's some problem with booting from SSD?

Can you list model name of your 2TB seagate drive? Also show screenshot from HDtune health.

If your drive looses partition table (becomes uninitialized), you must be doing something out of ordinary. Normally this should not happen.
Anyway - you can use Minitool Partition wizard free - partition undelete wizard to bring back lost partitions.
 
Reactions: Avinash6614
Jun 20, 2020
2
0
10
0
1st - go into BIOS and turn fast boot off.
2nd - why are you running windows installer? Do you intend to install windows on 2TB drive too?
3 - you said, you tried to boot from 2TB drive. Why? There's some problem with booting from SSD?

Can you list model name of your 2TB seagate drive? Also show screenshot from HDtune health.

If your drive looses partition table (becomes uninitialized), you must be doing something out of ordinary. Normally this should not happen.
Anyway - you can use Minitool Partition wizard free - partition undelete wizard to bring back lost partitions.
1. )i will try..

2.)I am installing os in 2tb instead of ssd, when installed in ssd, 2tb getting disappeard all the time. if i play any movie from 2tb, or if i use 2tb data it gets off.
installing os in ssd or 2tb is ok for me, but both of them not working,
3.)if i install os in 2tb some times its getting sctl+alt+dlt showing no boot device.
if i install in ssd, 2tb getting disappeared while using it.

https://ibb.co/PrGNgYS
presently the drive some times gets the partations, it shows, some times it shows as new one with one. but when we try to format it, it fails and again it shows the partitions
 

ASK THE COMMUNITY

TRENDING THREADS