Bought new ram for my PC and it wont boot when installed.

[ninjakai57]

I recently bought new DDR2 ram for my computer(2x4). When I tried to boot it would sometimes get to the windows loading screen and blue screen, or it would just not POST at all. I tried a lot of things to try and counter it but none seem to do anything but give different errors.

I have 8 gigs currently installed - 4x2 DDR2 - 800 MHz (keep in mind that new ram is also 800 MHz)
Motherboard - Asus P5QL Pro - Supports both new and old ram mentioned in every way I can find.
Graphics Card - AMD Radeon R7750
Operating System - Windows 10 Pro - OS Build 17134.556

I cannot recall the exact error messages but I can go install new ram again if needed.
When I Googled them came up with either Driver or Ram issues most of the time. I can't remember if all of them had it, but underneath it said "pci.sys".

 

[scout_03]

use only one stick of the new ram and give the error report back here .

 

[ninjakai57]

use only one stick of the new ram and give the error report back here .

All Error codes I got

THREAD_EXCEPTION_NOT_HANDLED

KERNEL_SECURITY_CHECK_FAILURE

Overclocking failed(Only on boot screen, also am not currently overclocked)

 

[scout_03]

first link diag cab for windows https://answers.microsoft.com/en-us/windows/forum/all/system-thread-exception-not-handled-windows-10/6e45a688-002c-4047-a9e4-35a601556192 for theother check all driver if they are up to date .

 

[ninjakai57]

first link diag cab for windows https://answers.microsoft.com/en-us/windows/forum/all/system-thread-exception-not-handled-windows-10/6e45a688-002c-4047-a9e4-35a601556192 for theother check all driver if they are up to date .

Drivers were alright, I tried booting up with just one stick of the new RAM. I got the blue screen saying
"KERNEL SECURITY CHECK FAILURE" in all 4 slots I tried.

 

[scout_03]

see this https://www.thewindowsclub.com/kernel-security-check-failure-windows