[SOLVED] Brand new RX 590 doesn't display anything

dotas1

Reputable
Dec 5, 2015
1,130
65
5,790
194
The PSU you use is not one of the best out there. The CX series are a bit lower than what a gaming rig should have.
If it's possible try a different PSU (preferably better quality) to see if the problem remains.
 

dotas1

Reputable
Dec 5, 2015
1,130
65
5,790
194
Do you have the proper drivers installed? Was it a clean install (fresh, new) or an existing one? Did you use DDU?
Are the proper cables attached from the PSU to the card? Is the card properly in the PCI slot?

Make and model of PSU please.
 
Sep 23, 2019
2
0
10
0
The PSU is a Corsair CX 550
It was installed on a fresh Windows 10 64bit install
The "static" messages on dxdiag appeared after installing the drivers, before it said something like "generic AMD graphics card" but wouldn't show anything on my monitor if the HDMI cable was connected to it.
I used the same cables that I'm using and work on my friend's old card
 

dotas1

Reputable
Dec 5, 2015
1,130
65
5,790
194
The PSU you use is not one of the best out there. The CX series are a bit lower than what a gaming rig should have.
If it's possible try a different PSU (preferably better quality) to see if the problem remains.
 

ASK THE COMMUNITY

TRENDING THREADS