[SOLVED] (brand new self build) computer turns on nothing on display

[Haroutonthetrack]

specs:
asus x570 tuf gaming plus mobo
amd ryzen 3700x cpu
32 gb vengeance lpx 3200 mhz
gigabyte aorus rtx 2060 super gpu

Hey i have build pc for the first time. and after a week of trial and error it finally starts running. but i dont have anything showing up on my monitor. tried both on the mobo and the gpu nothing. I have looking around online could find any good solutions. please help! and thank you.

 

[Darkbreeze]

What video output type are you using TO the monitor?

Tried a different cable or different output TYPE?

Have you made sure you have the auxiliary power connectors from the PSU (PEG/PCI/VGA) to the graphics card connected?

Have you tried a hard reset?


BIOS Hard Reset procedure

Power off the unit, switch the PSU off and unplug the PSU cord from either the wall or the power supply.

Remove the motherboard CMOS battery for five minutes. In some cases it may be necessary to remove the graphics card to access the CMOS battery.

During that five minutes, press the power button on the case for 30 seconds. After the five minutes is up, reinstall the CMOS battery making sure to insert it with the correct side up just as it came out.

If you had to remove the graphics card you can now reinstall it, but remember to reconnect your power cables if there were any attached to it as well as your display cable.

Now, plug the power supply cable back in, switch the PSU back on and power up the system. It should display the POST screen and the options to enter CMOS/BIOS setup. Enter the bios setup program and reconfigure the boot settings for either the Windows boot manager or for legacy systems, the drive your OS is installed on if necessary.

Save settings and exit. If the system will POST and boot then you can move forward from there including going back into the bios and configuring any other custom settings you may need to configure such as Memory XMP profile settings, custom fan profile settings or other specific settings you may have previously had configured that were wiped out by resetting the CMOS.

In some cases it may be necessary when you go into the BIOS after a reset, to load the Optimal default or Default values and then save settings, to actually get the hardware tables to reset in the boot manager.



Having a little background information about the "week of trial and error" and what that entailed would be helpful as well because there might be something related to that which is relevant to this.

 

[Haroutonthetrack]

yes i tried both dvi and hdmi. and there was light on the gpu

 

[Haroutonthetrack]

i tried what you sent me still nothing on the display. everything looks good gpu working mobo working cpu working but nothing on the display

 

[Darkbreeze]

Try benchtesting with minimal hardware?

How To - Motherboard bench testing

Finding the problem through bench testing If you are here then it’s likely you have encountered a serious hardware issue and have been unable to resolve it using the standard no-POST troubleshooting procedures. If you have not yet attempted to resolve your issues using the no-POST...

forums.tomshardware.com