Question Brand new SFF PC Build - no post unless I reset CMOS; also integrated graphics is NOT working. What is going on?

Aug 15, 2022
5
1
15
Issue as per title. I'll try to be as brief as possible. Basically two issues:
  • The computer will NOT post into BIOS unless I manually short the CMOS every single *time on boot. If I re-start after the initial post into BIOS, the computer will no longer post again (ie. will have to short CMOS again before getting anything up.
  • Despite my mobo/CPU combo (Asus ROG STRIX B660-i / i5-12600K) having integrated graphics, plugging into the integrated module does NOT work at all.
Any ideas as to what might be causing this? For full specs:
  • Mobo: Asus ROG STRIX B660-i
  • CPU: i5-12600K
  • Ram: Corsair Dominator Platinum 2x16gb DDR5-5600 CL36
  • Storage: WD SN850
  • Case: NR200P
  • PSU: SF750W
This is driving me insane. Am dreading at the idea of having to take apart the PC again for a rebuild - should have built it on tabletop first... Sigh.
 
Aug 15, 2022
5
1
15
Surely you're seeing something on the monitor to know that it's posting, yes?

Sounds like the "default graphics adapter" setting in the BIOS is trying to use a discrete card.

in this case, would it swap to the integrated GPU if no discrete GPU was attached? I had the GPU out and integrated still wasn’t working