[SOLVED] bronze psu how is the hwinfo idle

yairmagniv

Distinguished
Oct 11, 2013
69
0
18,540
hi i wanna know if this psu voltages temps are good im on idle rn new psu model seasonic 80 + certified bronze ss-850 am active PFC f3 fdb fan m12ii-850 bronze
B550 aorus elite
Ryzen 7 3700x
Rtx 2060
click on the picture to zoom in and thanks




 
Solution
Not being flippant or sarcastic but define "good".

If the presented temperatures (or other parameters for that matter) correspond with the rated temperatures or temperature ranges of the component(s) in question then likely "good".

There is always some margin of error with respect to temperature measurement. And some systems will run"low" or "high".

Not necessarily right in the middle of the range.

As you learn what is normal for your system under varying loads and conditions with no problems that becomes the "good".

Changes over tlme (temperatures gradually increasing) or, worse, yet sudden rapidly climbing temperatures are certainly indications of trouble.

Each build is unique. It will stabilize with and within...

Ralston18

Titan
Moderator
Not being flippant or sarcastic but define "good".

If the presented temperatures (or other parameters for that matter) correspond with the rated temperatures or temperature ranges of the component(s) in question then likely "good".

There is always some margin of error with respect to temperature measurement. And some systems will run"low" or "high".

Not necessarily right in the middle of the range.

As you learn what is normal for your system under varying loads and conditions with no problems that becomes the "good".

Changes over tlme (temperatures gradually increasing) or, worse, yet sudden rapidly climbing temperatures are certainly indications of trouble.

Each build is unique. It will stabilize with and within certain measured values. Departures from those values would be the "bad".

Do what you just did: every so often print out the specs and compare to previous results. You may discover some creeping change that, to date, had gone unnoticed.
 
Solution

yairmagniv

Distinguished
Oct 11, 2013
69
0
18,540
thanks
Not being flippant or sarcastic but define "good".

If the presented temperatures (or other parameters for that matter) correspond with the rated temperatures or temperature ranges of the component(s) in question then likely "good".

There is always some margin of error with respect to temperature measurement. And some systems will run"low" or "high".

Not necessarily right in the middle of the range.

As you learn what is normal for your system under varying loads and conditions with no problems that becomes the "good".

Changes over tlme (temperatures gradually increasing) or, worse, yet sudden rapidly climbing temperatures are certainly indications of trouble.

Each build is unique. It will stabilize with and within certain measured values. Departures from those values would be the "bad".

Do what you just did: every so often print out the specs and compare to previous results. You may discover some creeping change that, to date, had gone unnoticed.
thanks i just switch psu so i wonder