Question Brother MFC9130CW Laser Printer with bad color gradation and streaking

Nov 28, 2021
4
0
10
0
by "print density adjustment " if you mean calibration, yes I've performed calibration several times, but it deosn't change how the prints come out. If not please let me know.
 

ex_bubblehead

Champion
Moderator
Your manual lists the consumables and maintenance intervals. It's extremely important to follow the maintenance intervals exactly as laid out or your printer will become a very expensive boat anchor in short order.

If you don't already have the manual then find it here: https://support.brother.com/g/b/manualtop.aspx?c=us&lang=en&prod=mfc9130cw_us

You'll find the drum unit replacement guide in the "Setup Guide" section at the above link.
 
Nov 28, 2021
4
0
10
0
Your manual lists the consumables and maintenance intervals. It's extremely important to follow the maintenance intervals exactly as laid out or your printer will become a very expensive boat anchor in short order.

If you don't already have the manual then find it here: https://support.brother.com/g/b/manualtop.aspx?c=us&lang=en&prod=mfc9130cw_us

You'll find the drum unit replacement guide in the "Setup Guide" section at the above link.
Thanks for the info. I'm looking into it.
 

ASK THE COMMUNITY