Before I get going, here are the specs;
CPU: i7-7700k
MB: Asus Prime Z270-AR
GPU: Asus GTX1070 DUAL OC 8GB
RAM: 2 x GSkill Trident Z 8GB
HDD: Samsung 850 EVO 500GB
PSU: Thermaltake Toughpower Grand RGB 650W
OS: Win10 Home
All parts were purchased new ~20 months ago.
This started last Thursday. On Wednesday I updated my graphics driver, restarted, gamed for about three hours with no problems. Thursday I went to use the computer after work and within a few minutes in Windows it BSODs. This has continued till now and the computer is unusable. The code it gives me is WHEA_UNCORRECTABLE_ERROR (big help there) but when I view the crash logs it comes up with bug check 0x124 with hal.dll, ntoskrnl.dll and pshed.dll crashing.
The computer is not overclocked.
Here's what I have done;
GPU: Uninstalled drivers, removed from computer and plugged HDMI into motherboard. Issue persists. Observed fans running.
MB: Observed voltages in BIOS. All slightly over stated voltages. Upgraded BIOS to current version. Reset all settings to default. Verified no overclock.
RAM: Tested one stick at a time. Ran Memtest86 6 passes, no errors. Tried sticks in slots 2 and 4 (was originally in 1 and 3) Issue persisted
HDD: Ran check disk, no errors. Swapped in another drive. Issue persisted.
OS: Tried Windows reset feature. Think it's supposed to reset OS to what it was like when first installed. Issue persisted. Went to format and do a straight fresh install but it even bluescreens in the damn Windows installer.
CPU: I ran the Intel processor tool and it passed. Temps good, never gets over 80C under load. Only part with a replacement plan, so I brought it to Micro Center. They ran Prime95 for ~45 minutes and said it worked flawlessly.
PSU: Unplugged every connection and replugged. Checked voltages in BIOS, all were a bit over the stated voltage. Observed fan running. Lights up normally.
Every part has been physically checked for damage. Every component has been reseated in the motherboard and every harness pulled and reinserted. The entire computer and every component has been blasted out with air.
I've just now done something I should have a while ago and booted into safe mode. The computer DOES run in safe mode, been on for an hour.
Zip with minidumps; https://drive.google.com/open?id=129--DUkwdszx9F_BYHVm8zqbx3IR92gm
BlueScreenView summary; https://drive.google.com/open?id=1IvAbMpJV9NY-cK633vLeoFmlnpsqgQXO
Screen from BSV with the errors and info; https://drive.google.com/file/d/1onZF0Wb2agd2rrJnI_y1O303XzXpTVMU/view?usp=sharing
Please help! Any info is much appreciated, I miss using my computer. If you need any additional info let me know. Keep in mind I can only operate in Windows for minutes at a time for the moment.
CPU: i7-7700k
MB: Asus Prime Z270-AR
GPU: Asus GTX1070 DUAL OC 8GB
RAM: 2 x GSkill Trident Z 8GB
HDD: Samsung 850 EVO 500GB
PSU: Thermaltake Toughpower Grand RGB 650W
OS: Win10 Home
All parts were purchased new ~20 months ago.
This started last Thursday. On Wednesday I updated my graphics driver, restarted, gamed for about three hours with no problems. Thursday I went to use the computer after work and within a few minutes in Windows it BSODs. This has continued till now and the computer is unusable. The code it gives me is WHEA_UNCORRECTABLE_ERROR (big help there) but when I view the crash logs it comes up with bug check 0x124 with hal.dll, ntoskrnl.dll and pshed.dll crashing.
The computer is not overclocked.
Here's what I have done;
GPU: Uninstalled drivers, removed from computer and plugged HDMI into motherboard. Issue persists. Observed fans running.
MB: Observed voltages in BIOS. All slightly over stated voltages. Upgraded BIOS to current version. Reset all settings to default. Verified no overclock.
RAM: Tested one stick at a time. Ran Memtest86 6 passes, no errors. Tried sticks in slots 2 and 4 (was originally in 1 and 3) Issue persisted
HDD: Ran check disk, no errors. Swapped in another drive. Issue persisted.
OS: Tried Windows reset feature. Think it's supposed to reset OS to what it was like when first installed. Issue persisted. Went to format and do a straight fresh install but it even bluescreens in the damn Windows installer.
CPU: I ran the Intel processor tool and it passed. Temps good, never gets over 80C under load. Only part with a replacement plan, so I brought it to Micro Center. They ran Prime95 for ~45 minutes and said it worked flawlessly.
PSU: Unplugged every connection and replugged. Checked voltages in BIOS, all were a bit over the stated voltage. Observed fan running. Lights up normally.
Every part has been physically checked for damage. Every component has been reseated in the motherboard and every harness pulled and reinserted. The entire computer and every component has been blasted out with air.
I've just now done something I should have a while ago and booted into safe mode. The computer DOES run in safe mode, been on for an hour.
Zip with minidumps; https://drive.google.com/open?id=129--DUkwdszx9F_BYHVm8zqbx3IR92gm
BlueScreenView summary; https://drive.google.com/open?id=1IvAbMpJV9NY-cK633vLeoFmlnpsqgQXO
Screen from BSV with the errors and info; https://drive.google.com/file/d/1onZF0Wb2agd2rrJnI_y1O303XzXpTVMU/view?usp=sharing
Please help! Any info is much appreciated, I miss using my computer. If you need any additional info let me know. Keep in mind I can only operate in Windows for minutes at a time for the moment.