Bsod caused by pci express card

[scotty1105]

I recently put in a trendent TEW-807ECH ac 1200 pci exspess wifi card into my new skylake build. The iproblem is I am getting bsod whea_uncorrectable_error after i do the install. The first time i installed it the system ran fine until i turned off the computer. Once i turned it back on i kept getting the whea_uncorrectable_error. I finally had to do a sytem restore which corrected the problem. To make sure that it was indeed my pci card i installed it once more. Again same thing everything worked great until i restarted the computer. Once i did that i got the whea_uncorrectable_error all over again. I did a system restore to resolve the issue. Although now i am faced with a $60 pci card i cant use. I have seen others who have had the same issue but nobody ever found a solution. I am running a intel 6700k 8g ddr4 @3000 w/corsair h100x cooler. Nivida 980 w/corsair h80i cooler on a gigabyte 170z gaming series 5 mobo. I am running it on a windows 10 setup. If anyone has any thoughts to this i am all ears. I have also updated all my drivers so it cant be a issue of not having up to date drivers. Again any help would be much appreciated.

 

[ihog]

http://www.trendnet.com/support/supportdetail.asp?prod=105_TEW-807ECH

Are you using this driver?

Also, if all else fails, I recommend this: http://www.amazon.com/Netis-WF2190-Wireless-Long-Range-Supports/dp/B00I604M00?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_detailpage_o08_s00

It works fantastic for me.

 

[johnbl]

turn off the machine,install the card, boot into BIOS and update the BIOS or reset it to defaults. then boot into windows and see if you can still get a bugcheck.

(updating the bios or reset to defaults will make the bios scan for hardware and rebuild the database of hardware settings it sends to windows)

 

[scotty1105]

Thanks guys for helping out, 1st i used the driver update that came with the pci card. 2nd time around i used the website driver update neither made any difference. Also the Netis card u recommend is only for windows 8 it says. And i am using windows 10 unless i missed something.

To the other post i will try to reset the default in bios. I never updated my bios because I was informed i didn't need to. But I'll give it a try and let u know how it goes

 

[ihog]

It's not only Windows 8: http://www.netis-systems.com/en/products/Dualband-Series/904.html#.V0MeBOSYI1o