BSOD from ntoskrnl.exe in windows 10 (64 bit)

KykiJJ

Commendable
Nov 22, 2016
6
0
1,510
I have been getting a lot of blue screen errors due to the ntoskrnl.exe driver over the past two weeks and I am unable to fix them. The errors occur whilst booting up my pc. I get errors ranging from memory management to page fault in nonpaged area, but all errors say the problem is with ntoskrnl.exe. After finally logging in there are no problems and no blue screens. The errors are as follows:

122916-51250-01.dmp , 29/12/201612:48:42 , SYSTEM_PTE_MISUSE , 0x000000da 00000000`00000504 , fffff9ca`8014d9a8 , 00000000`00000000 , 00000000`00029b35 ntoskrnl.exe , ntoskrnl.exe+14a6f0 , x64 ntoskrnl.exe+14a6f0 , C:\WINDOWS\Minidump\122916-51250-01.dmp , 8 , 15 , 14393 , 471,156 , 29/12/2016 , 12:52:19

122716-50171-01.dmp , 27/12/2016 15:21:03 , SYSTEM_PTE_MISUSE , 0x000000da , 00000000`00000504 , ffffd8d7`40be8a00 , 00000000`00000000 , 00000000`0017d140 , ntoskrnl.exe , ntoskrnl.exe+14a6f0 , x64 , ntoskrnl.exe+14a6f0 , C:\WINDOWS\Minidump\122716-50171-01.dmp , 8 , 15 , 14393 , 534,756 , 27/12/2016 , 15:24:36

122716-52687-01.dmp , 27/12/2016 12:58:57 , PAGE_FAULT_IN_NONPAGED_AREA , 0x00000050 , ffffa5ff`333001f0 , 00000000`00000000 , fffff80f`ccad1934 , 00000000`00000002 , ntoskrnl.exe , ntoskrnl.exe+14a6f0 , x64 , ntoskrnl.exe+14a6f0 , C:\WINDOWS\Minidump\122716-52687-01.dmp , 8 , 15 , 14393 , 521,084 , 27/12/2016 , 13:01:43

122716-54796-01.dmp , 27/12/2016 , 12:45:31 , PAGE_FAULT_IN_NONPAGED_AREA , 0x00000050 , ffffaefe`2fd00000 , 00000000`00000000 , fffff80d`dd821934 , 00000000`00000002 , ntoskrnl.exe , ntoskrnl.exe+14a6f0 , x64 , ntoskrnl.exe+14a6f0 , C:\WINDOWS\Minidump\122716-54796-01.dmp , 8 , 15 , 14393 , 523,964 , 27/12/2016 , 12:56:23

Does anyone know how to fix this?
 

KykiJJ

Commendable
Nov 22, 2016
6
0
1,510


Here are the hardware details:
CPU: INTEL(R) Core™ i7-4790K Quad Core 4.00 GHz 8MB Cache LGA1150 + HD Graphics
HDD: 2TB SATA-III 6.0Gb/s 64M Cache 7200rpm Hard Drive (Single Hard Drive)
HDD2: 120GB Kingston SSDNow V300 SATA III Gaming MLC Solid State Disk (Single Drive)
MEMORY: 16GB (2x8GB) DDR3/1866mhz Dual Channel Memory (HyperX Genesis w/Heat Spreader)
MOTHERBOARD: ASUS Z97-P INTEL Z97 Chipset, ATX Mainboard w/ 4 RAM slots, HD Audio, HDMI, GbLAN, USB 3.0, SATA-III, 1x Gen3 PCIe x16, 1x Gen2 PCIe x16, 2x PCIe x 1 & 2x PCI
OS: Microsoft Windows 10(64-bit Edition)
POWERSUPPLY: Corsair 600 Watts CX600M Modular Gaming Power Supply
SOUND: HIGH DEFINITION ON-BOARD 7.1 AUDIO
VIDEO: Asus ROG Strix GeForce STRIX-GTX1080-A8G-GAMING 8 GB GDDR5 Graphics Card

I have not disabled the swap file and i will run the checks on the memory and HDD/SDD.
 

KykiJJ

Commendable
Nov 22, 2016
6
0
1,510
There is the following information on the ram - KHX18C10/8
9905403 - 855.A00LF
0000006680564 - P000023
PLLR4 - L9KP65 - NWFLF
CPMM1671475
I think the first code is the part number but I'm not sure.
 

KykiJJ

Commendable
Nov 22, 2016
6
0
1,510
I think some settings in the bios for he dram were changed, causing the blue screens, I was able to log on using the settings you provided. Hopefully this has fixed the issue and it won't occur anymore. Thank you for the help!