I just installed two WD black components, a sn750 nvme ssd and a 1 tb desktop HDD, and after doing so my computer cycles through the ROG boot screen, attempting repair screen, and the BSOD with the file name iastorac.sys as the error. I wiped everything (didnt have much except for a few games) and tried a fresh install, but when I went to go download drivers, I got the same cycle of screens as before.
What can I do to fix this since I can't seem to boot into safe mode (cannot access windows 10 advanced settings)?
I did do a bios update via the bios utility with the same cycle of screens afterwards.
PC Specs:
Case: Nanoxia Project S
MB: Asus Z390-E
CPU: i7 9700k with Hyper 212EVO cooler
GPU: Asus rog 1050 ti strix updated to 419.67
Ram: 32 GB T-Force RGB DDR4
OS: Windows 10 Build 10586.1176
PSU: Thermaltake Toughpower grand series rgb 850W
HDD: Seagate barracuda 2TB 7200 rpm 64 mb cache raid with a WD black sn750 nvme SSD and a WD black desktop HDD
What can I do to fix this since I can't seem to boot into safe mode (cannot access windows 10 advanced settings)?
I did do a bios update via the bios utility with the same cycle of screens afterwards.
PC Specs:
Case: Nanoxia Project S
MB: Asus Z390-E
CPU: i7 9700k with Hyper 212EVO cooler
GPU: Asus rog 1050 ti strix updated to 419.67
Ram: 32 GB T-Force RGB DDR4
OS: Windows 10 Build 10586.1176
PSU: Thermaltake Toughpower grand series rgb 850W
HDD: Seagate barracuda 2TB 7200 rpm 64 mb cache raid with a WD black sn750 nvme SSD and a WD black desktop HDD
Facebook
Twitter
Instagram