Hi everyone, hate to join just to ask for help, but I'm stumped. I just finished building a new computer, had it up and running for day (did all my drivers and Windows updates), it crashed out on me while playing a game for a couple of hours and have not been able to reboot into windows since. I've tried booting in safe mode using the 3 power cycle method as well as trying to boot from a USB which has the Windows 10 installer on it.
Build is as follows:
Motherboard: Gigabyte Z390 Aorus Ultra
CPU: i7-9700K
RAM: G.Skill TridentZ DDR4 2x16GB in dual channel (A2/B2)
GPU: EVGA RTX 2070 Super
PSU: Corsair RM750x
SSD: Crucial P1
HDD: WD Black 4TB
OS: Window 10 Pro
I've tried pulling both hard drives individually to see if I could boot from the USB and have had no luck. I have also bypassed the GFX and am running off the integrated graphics. I have checked the RAM voltage in XMP and draw 1.5V. The variety of errors I get are as follows:
Page Fault in Nonpaged Area
System Thread Exception Not Handled
Unexpected Kernel Mode Trap
Attempted Write to Readonly Memory, with a what failed of CI.dll
IRQL Not Less or Equal
Kmode Exception Not Handled, with a what failed of Ndis.sys
I'm completely lost on where to go, so any help would be greatly appreciated.
Edit: Forgot to mention that before I pulled the SSD tonight, it was not showing up in the BIOS yesterday under the NVMe manager, so not sure if that is related as I had been booting off it before the crash.
Build is as follows:
Motherboard: Gigabyte Z390 Aorus Ultra
CPU: i7-9700K
RAM: G.Skill TridentZ DDR4 2x16GB in dual channel (A2/B2)
GPU: EVGA RTX 2070 Super
PSU: Corsair RM750x
SSD: Crucial P1
HDD: WD Black 4TB
OS: Window 10 Pro
I've tried pulling both hard drives individually to see if I could boot from the USB and have had no luck. I have also bypassed the GFX and am running off the integrated graphics. I have checked the RAM voltage in XMP and draw 1.5V. The variety of errors I get are as follows:
Page Fault in Nonpaged Area
System Thread Exception Not Handled
Unexpected Kernel Mode Trap
Attempted Write to Readonly Memory, with a what failed of CI.dll
IRQL Not Less or Equal
Kmode Exception Not Handled, with a what failed of Ndis.sys
I'm completely lost on where to go, so any help would be greatly appreciated.
Edit: Forgot to mention that before I pulled the SSD tonight, it was not showing up in the BIOS yesterday under the NVMe manager, so not sure if that is related as I had been booting off it before the crash.