I built this PC and installed windows 10 on it.
Everything appeared to be going smoothly until I would start up a game. After a couple minutes my pc would crash to an error_memory_management screen. Sometimes it would crash to irql_not_less_or_equal. Occasionally it would crash to kmode_exception_not_handled. A couple times I would get page_fault_in_nonpaged_area.
CPU: intel i5 6600k at 3.5Mhz
GPU: AMD R9 380 4GB
PSU: Corsair CX 600W
MOBO: Asrock Z170 Pro4
RAM: 1X8 GB of DDR4 @ 2133
I'll attach a screenshot of cpu Z.
http://imgur.com/GFj65S3
I set the voltage to the ram at 1.2V as recommended. I think I made a mistake only ordering 1 stick, as it can't take advantage of dual channel. I ran memtest86 on it for 15 passes and there were no errors detected. Although I ran Windows memory diagnostic and 2/3 times it told me there were hardware issues, though it froze before it could finish both times. I ran it a third time and it finished saying there were no errors. I don't know what to think of that. I've also tried reseating the RAM into different slots. That didn't work either. All drivers are up to date. I uninstalled my graphics driver, still errors. Reinstalled it, still errors. I think I tried a previous version of the driver, didn't work either.
Other than that, my system is up to date and it only seems to crash whenever I start up a game.
I have new ram coming in the mail, I'll see if that works.
My question is whether or not my system would become more stable if I changed the command rate to 2T instead of 1T?
Any help would be appreciated with this issue, I'm really at a loss.
Thanks
Everything appeared to be going smoothly until I would start up a game. After a couple minutes my pc would crash to an error_memory_management screen. Sometimes it would crash to irql_not_less_or_equal. Occasionally it would crash to kmode_exception_not_handled. A couple times I would get page_fault_in_nonpaged_area.
CPU: intel i5 6600k at 3.5Mhz
GPU: AMD R9 380 4GB
PSU: Corsair CX 600W
MOBO: Asrock Z170 Pro4
RAM: 1X8 GB of DDR4 @ 2133
I'll attach a screenshot of cpu Z.
http://imgur.com/GFj65S3
I set the voltage to the ram at 1.2V as recommended. I think I made a mistake only ordering 1 stick, as it can't take advantage of dual channel. I ran memtest86 on it for 15 passes and there were no errors detected. Although I ran Windows memory diagnostic and 2/3 times it told me there were hardware issues, though it froze before it could finish both times. I ran it a third time and it finished saying there were no errors. I don't know what to think of that. I've also tried reseating the RAM into different slots. That didn't work either. All drivers are up to date. I uninstalled my graphics driver, still errors. Reinstalled it, still errors. I think I tried a previous version of the driver, didn't work either.
Other than that, my system is up to date and it only seems to crash whenever I start up a game.
I have new ram coming in the mail, I'll see if that works.
My question is whether or not my system would become more stable if I changed the command rate to 2T instead of 1T?
Any help would be appreciated with this issue, I'm really at a loss.
Thanks
Facebook
Twitter
Instagram