BSOD on memory management 2133 mhz ram

[dani3lc]

Hi there,

i build up a budget gaming pc with the spec as below

- Asus A88XM-A motherboard
- AMD A10 7850k APU processor
- Apacer Ram Desktop DDR3 GIANT II 8GB PC2133
- AVF PSU EXTREME POWER 750W

I make a clean install of Win8 Pro. I read on the forum on how to choose the profile on getting 2133mhz ram which i think i did it correctly and even upgraded to the latest bios update as well.

Here is where i need help. my desktop BSOD randomly once in awhile and mostly cant even past 24 hours of stability. been frustrated fixing it till past few days i tried lowering it down to 1866mhz and basically i got 48 hours of non bsod. so can anybody help me up here i wanna fix this up but i got no experience on ram management at all. from what i read in the forum would it be cause of :

- Ram not certified on the vendor list on asus site?
- Auto Tune voltage on 2133mhz on bios?
- Faulty on my ram hardware?

below is the latest minidump file from one of the bsod. PLEASE help me......

[/img]

 

[Tradesman1]

Try raising the CPU/NB voltage + 0.14 so if at 1.1 set to 1.24

 

[dani3lc]

well ok ill try to set it up and come back if there is any problem thz for the advice

 

[dani3lc]

Try raising the CPU/NB voltage + 0.14 so if at 1.1 set to 1.24

do u mean by the SB 1.1V Voltage?? Sorry i got 0 knowledge with voltage frequencies at all. i had the pic below for voltage. could you please guide me.... but the SB voltage max can only be raise to 1.22

[/img]

 

[Tradesman1]

On yours it's the VDDNB, take it up to 1.21

 

[dani3lc]

okay already set it up to 1.225 i guess gonna wait and c for the result. thz for the guide....will be back to let you know if everything is fine

 

[Tradesman1]

Will B arournd

 

[dani3lc]

Will B arournd

i guess that doesn't work i got another bsod. Check the dump file its the same problem ( memory management )

would it be my hardware problem?? motherboard or ram that is not certified to increase the frequencies?

[/img]

 

[dani3lc]

could anyone else helpout though??

 

[Tradesman1]

Let's try 1.3

 

[dani3lc]

well i did try to increase higher yesterday to something like 1.25+ and basically around 12 hours it get bsod again....well ill try the 1.3 as u mention though but its there any chances that might be faulty of hardware? though i dun have frequent bsod like other forumers who had 5-6 times in a day cause usually my bsod comes when i put it on idle mode. i could stream movie, play games like dota 2 and surfing the net like usual and it looks normal though.

btw since like i mention when i put 1866mhz my pc looks just fine without any problem with no bsod does that means my ram is not a spoil wan?

 

[Tradesman1]

It's possibly something else, but could be a lot of things, a bad driver, old driver, BIOS bug, could be a problem in Win itself

 

[dani3lc]

well basically this is the 3rd time i reformat it but the problem still persist. bios are on latest version. driver shud be the latest of all especially the amd catalyst i even install the 14.2 version and even use easy driver software to locate latest update driver for my spec. so what else could be the problem..... well since i could sit tightly without bsod in 1866 does that mean its confirm that the voltage tuning problem since i cant stay 2133 on stable though?

 

[Tradesman1]

Might well be that or weak sticks, or a weak MC (memory controller)

 

[dani3lc]

so if its a weak stick i cant do anything though except changing it? well since its gonna be wait anywhere what can i still do if it gets bsod in 1.3V later? just incase you are not around at least i can try it out.....

btw thanks for all your time , i appreciate it alot

 

[dani3lc]

Might well be that or weak sticks, or a weak MC (memory controller)

well i just get another bsod........

could it be my psu problem? some info that i search on the net do mention so....