Bsod on my new build every time I try installing/booting

Aug 5, 2018
3
0
10
Hello there, quite a long story. So I build my new system, installed Windows, everything was going very smooth. About 3 days later while trying to boot into windows I got a memory exception bsod. Thought it was just a strange random crash, then it happened again. Eventually it happened every time I tried to boot, a different message would pop up every time (can't really remember what they said)

So now I tried booting from my USB to reinstall windows, and half way through the installation it bsods every time.

To Anyone who can help me it would be much appreciated. Thanks.
 
Solution
Was it an Out of Memory exception? Had you changed page file settings?

Check ram out... I might be jumping the gun here by saying this but maybe the part of ram that is faulty might not have been used until today. Without knowing what other BSOD you were getting, its hard to say.

It does seem odd it only started after it was installed. I would have thought bad ram show its head earlier than after the install process. It worked fine the 1st time.
On another PC, download Memtest86 and use it to create a bootable USB. Test each memory stick, one stick at a time, up to 8 passes. Any error count higher than 0 is too high, remove/replace any ram with errors.

normally, errors during install are ram.

Is ram running at default speed or using an XMP profile? IS ram on the motherboards compatibility list?
 
The ram is on the comparability list. It's lpx vengeance 8gb 2400mhz and it's a single dim I have installed and tried it on both A1 and b1 slots. But what I don't understand is that my pc was running fine up until today.
 
Was it an Out of Memory exception? Had you changed page file settings?

Check ram out... I might be jumping the gun here by saying this but maybe the part of ram that is faulty might not have been used until today. Without knowing what other BSOD you were getting, its hard to say.

It does seem odd it only started after it was installed. I would have thought bad ram show its head earlier than after the install process. It worked fine the 1st time.
 
Solution


I will try memtest tomorrow evening and post back here with an update, any other comments will be appreciated, and thanks !