BSOD still happening after multiple attempts to fix

[regiousblue]

Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: 1000007e
BCP1: FFFFFFFFC0000005
BCP2: FFFFF88004AF3668
BCP3: FFFFF880039BD148
BCP4: FFFFF880039BC9B0
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\112317-67298-01.dmp
C:\Users\Asus\AppData\Local\Temp\WER-148107-0.sysdata.xml

Bassicaly I know the BSOD is from my USB
<DESCRIPTION>Intel(R) USB 3.0 eXtensible Host Controller</DESCRIPTION>

<HARDWAREID>PCI\VEN_8086&DEV_8C31&SUBSYS_85341043&REV_04</HARDWAREID>

<SERVICE>iusb3xhc</SERVICE>

<DRIVER>iusb3xhc.sys</DRIVER>

The Iusb3xhc.sys is the error in my BSOD

I have tried to reinstall the drivers but that didn't seem to work, So after lots of trouble shooting I decided to post here any help would be greatfull

 

[tsnor]

The windows forum might have been a better place. If so maybe a moderator will move it.

PC hardware is not checked. The easiest way to see if your software stack is bad is to use a spare drive (or a small cheap SSD) to totally replace your current system drive (remove your current drive so it won't get updated). Install a clean copy of windows on the new drive, and see if the problem goes away.
--- if the problem stays it's likely HW. I can't see from your specs what hardware you have. Assuming two dimms - remove one and see if the problem goes away. If not remove the other and put the first back in. Often problems like this are memory if they are hardware. If it's not memory you can try under-clocking things. If that fails you are left replacing things one at a time.
--- If the problem goes away with a fresh load of windows you need to decide if it's easier to move all your stuff to a new copy of windows or to try to make your old copy work.

Good luck.