Question BSOD with different error codes on a home build

Apr 9, 2020
2
0
10
0
This is driving my nuts I have been getting the BSOD since I built my PC JAN 2020. It usually happens while using Photoshop and the Error Code changes each time. The last 3 have been daily now so I'm getting worried. I usually update the graphics driver and make sure everything is up to date and restart and I don't see it again then it happens out of nowhere

I've seen: (In this order)

KMODE_EXCEPTION_NOT_HANDLED

KERNEL_SECURITY_CHECK_FAILURE

EVENT_TRACING_FATAL_ERROR

DRIVER_IRQL_NOT_LESS_OR_EQUAL

KMODE_EXCEPTION_NOT_HANDLED

In the event viewer, I have a lot of warnings from

The application-specific permission settings do not grant Local Activation permission for the COM Server application with CLSID

I am still using the unactivated windows 10 on my machine so I'm not sure if it is license related.

My system is

Ryzen 2700x

Nvidia RTX 2070 Super

MPG-X570-GAMING-EDGE-WIFI

Corsair CMW32GX4M2C3200C16 Vengeance RGB PRO 32GB (2x16GB) DDR4 3200

CORSAIR RM Series, RM650, 650 Watt, 80+ Gold Certified, Fully Modular Power Supply

Any help would be awesome Thanks!
 
Last edited:
Apr 9, 2020
2
0
10
0
Have you updated your motherboard to the latest BIOS?
Have you tried lowering your memory speed or using your motherboards A-XMP OC MODE?
What is model your graphics card?
I have not updated the BIOS.. First time builder and was nervous about bricking it from the start. Since it was working till recently I didn't see the need. I used the profile on the BIOS for the RAM but I can try to lower it to the first profile if you think that would help.

gigabyte 2070 super
 
I have not updated the BIOS.. First time builder and was nervous about bricking it from the start. Since it was working till recently I didn't see the need. I used the profile on the BIOS for the RAM but I can try to lower it to the first profile if you think that would help.

gigabyte 2070 super
Just try lowering the memory speed for a while just to see if it helps or not.
 

ASK THE COMMUNITY