BSOD

[jayapaulr]

Hello All,

Not sure if this post can be done here.
Now a days my system go to BSOD caused by grdv.sys SYSTEM_SERVICE_EXCEPTION
Can some one help in fixing this issue

Thanks

 

[Herr_Koos]

More info please? What hardware and operating system do you use?

 

[gamerk316]

SYSTEM_SERVICE_EXCEPTION basically means a Windows service crashed. Because a coding error is VERY unlikely, its likely due to either a poorly written driver, or RAM corruption.

RAM is easier to prove, so run memtest86 and report results.

 

[jayapaulr]

System Configuration

Processor AMD Phenom(tm) II X6 1090T Processor
Memory (RAM) 12.0 GB
Graphics AMD Radeon HD 7800 Series
Manufacturer Gigabyte Technology Co., Ltd.
Model GA-880GM-USB3
Total amount of system memory 12.0 GB RAM
System type 64-bit operating syste

 

[pjmelect]

You could try running as the administrator in the Command Prompt "SFC /scannow" If you find any errors it is a sure sign that you have memory problems.

 

[jayapaulr]

Tried that didnt report any issues

C:\Windows\system32>SFC /scannow

Beginning system scan. This process will take some time.

Beginning verification phase of system scan.
Verification 100% complete.

Windows Resource Protection did not find any integrity violations.

 

[Herr_Koos]

I found some references to similar problems. Apparently gdrv.sys is installed by certain Gigabyte software utilities. Did you install some overclocking or power management software that came with your Gigabyte GPU? try removing it to see if this fixes the problem.

 

[jayapaulr]

I have uninstalled the gigabyte utilities,let me see if that fixes i will keep the system idle all night and see if it hangs again.

 

[Herr_Koos]

Check with Task manager if that particular process is still present, just to be sure.

 

[pjmelect]

Check this link out and remove two of your memory sticks.

http://www.sevenforums.com/crashes-debugging/69811-gdrv-sys-bsod-win-7-home-premium.html

 

[jayapaulr]

Appreciate the response,last night after uninstalling the Gibabyte utilities i can see my maching running without issues ,i will test it today aswell and see a whole night.
Will update once done.Thanks

 

[Herr_Koos]

Good to hear!

 

[jayapaulr]

Best answer selected by jayapaulr.

 

[did007]

i am having the same problem after installing gigabyte easy tune and app center. remove those two soft...and the problem will be sokved

 

[edwardh435]

And if you can't uninstall that piece of crap software because the BSOD happens right after logging on and you can't uninstall it in safe mode, use this workaround:
https://support.eset.com/kb2098/