Budget Build Advice

[Ishaan_Kumar]

I am building a pc comprises of:
CPU: G-3258(I am going to overclock it)
MOTHERBOARD: Asus H81M-V3(I need HDMI and overclock)
RAM: Kingston HyperX 16GB 1866Mhz
PSU: Antec VP450P
HDD: Kingston SSD 120GB(Space is not the issue, I need speed 😀)
Graphic Card: MSI GTX 750 TI


I wanna know am I making the right choice. Previously I was going for Corsair CX 430 for PSU. Now it's Antec. Is it OK?

Previously I was in confusion with motherboard but I came to a decision. It is priced Rs. 5000. It is a little expensive for my build. Can you recommend me a nice one. ASUS preferred then Gigabyte. I need HDMI and overclock my G3258. I need HDMI because I will but Graphics Card next month. That's why.

I haven't decided the case yet. Please recommend me one which has Glass side panel.

I live in India. So recommend considering that

 

[Randyivy]

That board will not support 1866 speed ram , get a set of 1600 sticks. You would need a z97 board most likely for higher speeds of ram. for a budget build 1600 is going to be just fine.

Both of those power supplies will work. Nice little budget build you have there.

here is a very nice case with a side window.
http://www.newegg.com/Product/Product.aspx?Item=N82E16811147107&cm_re=blackhawk-_-11-147-107-_-Product
its a little pricey , and bigger than most mid towers though.

 

[superninja12]

CPU: G-3258(I am going to overclock it)
cpu cooler: hyper 212 evo/cryorih h7
MOTHERBOARD: Asus H81M-V3(I need HDMI and overclock)
RAM: Kingston HyperX 2x4 1333Mhz
PSU: seasonic s12ii 520w
HDD: Kingston SSD 120GB(Space is not the issue, I need speed 😀 )
Graphic Card: MSI GTX 750 TI

- at first read this http://www.ukgamingcomputers.co.uk/overclocking-pentium-g3258-on-h81-b75-h87-h97-chipsets-a-60.html
- u need a good cpu cooler if u are going to overclock, thats tock cooler isnt made for ocing.
- u dont need 16gb of ram believe me and ddr3 ram= ddr3 ram u wont notice any difference
- more stable psu so it can deliver a stable voltage if u are going to overclock

-if the extra cosdt isnt worth it youre better off with an i3

 

[Ishaan_Kumar]

That board will not support 1866 speed ram , get a set of 1600 sticks. You would need a z97 board most likely for higher speeds of ram. for a budget build 1600 is going to be just fine.

Both of those power supplies will work. Nice little budget build you have there.

here is a very nice case with a side window.
http://www.newegg.com/Product/Product.aspx?Item=N82E16811147107&cm_re=blackhawk-_-11-147-107-_-Product
its a little pricey , and bigger than most mid towers though.

Will GA-H97M-D3H support 1866 MHz memory sticks. If I will upgrade those 1866 MHz sticks would be helpful. Right?

 

[Ishaan_Kumar]

That board will not support 1866 speed ram , get a set of 1600 sticks. You would need a z97 board most likely for higher speeds of ram. for a budget build 1600 is going to be just fine.

Both of those power supplies will work. Nice little budget build you have there.

here is a very nice case with a side window.
http://www.newegg.com/Product/Product.aspx?Item=N82E16811147107&cm_re=blackhawk-_-11-147-107-_-Product
its a little pricey , and bigger than most mid towers though.

Newegg cost a lot of money on shipping in India 🙁