Build Check, Wire Check

[oldboyzubayr]

Alright so my build has finally come to the point where all the parts are being ordered, but I feel it is too simple, I need to know with your guys' advice what exactly should I add more, Watercooling for now is not necessary, however I am thinking about adding fans with the case fans, and I was wondering if I would need extra cables for power or to connect all the components together, I am buying all these components new however I am using an older PSU that I bought off someone and that seems to be short some wires but still has enough to light up my current build!!!

Without further ado, my build:
*AMD FX-8350 4.0GHz 8-Core Processor
*Cooler Master Seidon 240M 86.2 CFM Liquid CPU Cooler
*Asus SABERTOOTH 990FX R2.0 ATX AM3+ Motherboard
*Corsair Vengeance 8GB (2 x 4GB) DDR3-1866 Memory
*Samsung 840 Series 120GB 2.5" Solid State Disk
* SLI EVGA GeForce GTX 760 4GB Video Card
*Xigmatek Elysium Black ATX Full Tower Case
*OCZ Fatal1ty 750W 80 PLUS Bronze Certified ATX12V / EPS12V Power Supply
*Microsoft Win 7 64 Bit

 

[smorizio]

That a newer power supply. I would look at the newegg photos and see if your missing cables. If you are I contact the power supply vendor see if you can get the missing cables. Most good cases use case fans that have the mini power plug to connect to the mb fan headers. If there using the larger four pin molex connector there are gender changer cables to go from the mb fan headers to molex. If you plug the fans into the power supply there going to run at 100 percent all the time. Some time you need to use a y cable to connect two fans to one mb fan header. Some people spend the extra 20-30 dollars and use a fan controller in one of the drive bays to controller up to six fans at once.