Question Building a PC and get no signal to the monitor when turning it on?

[spacesailor]

Hi all. I'm building my first pc and need some help. I followed all the instructions, made sure all the wires were in place, and I'm getting no signal to my monitor. My build is as follows:

-MSI B450 Gaming Plus Max Motherboard
-AMD Ryzen 3 3200G Processor with Radeon Graphics
-Corsair Vengeance LPX 16 GB DDR4-3200 CL16 Memory
-EVGA 600 W 80+ Certified ATX Power Supply
-PNY CS900 Solid State Drive

I've tried reseating the ram, made sure it went into the DIMMA2 slot first, and even tried it with just one or the other. I took out the processor and made sure no pins were bent and that it was in the right way, and I checked my cords and they all seem in place.

The fans turn on, including the fan on the processor, and the cpu light turns on as well. I tried multiple HDMI cords, and even a different graphics card, but I can't seem to figure out the issue. Any suggestions would be appreciated! It's my first build, so I really don't know where to go from here.

 

[MeanMachine41]

Go here for the trouble shooting check list: http://www.tomshardware.com/forum/261145-31-perform-steps-posting-post-boot-video-problems.

 

[spacesailor]

Go here for the trouble shooting check list: http://www.tomshardware.com/forum/261145-31-perform-steps-posting-post-boot-video-problems.

Thank you, I'll go through it right now and see if it can help!

Edit: Went through it, and I already checked all that. The only thing I can't check is the BIOS because I don't have a screen appearing. Thank you though!

 

[geo917]

try booting from MOBO graphics fist. sometimes BIOS has to be set to boot to graphics card instead of onboard graphics. look for HDMI ports next to USB ports on the back panel