Built custom PC: Will not turn on!

sapple

Honorable
Jan 28, 2014
9
0
10,510
This is my first PC build in about 8 years and I am having some trouble getting it to boot. When I hit the power button the fans kick on for 1 second then turn off.


Specs:
Processor: Intel i-5 (4430 I think)
Motherboard: Asus B85M-E/CSm
HD 1: 150gb (planing to load windows 7 via usb)
HD 2: 1tb
Ram: 8gb (2x4 ddr3)
Power: LEPA N500

any suggestions?
 
Solution
Yes, it needs another power connector. Step #2 in the checklist is the most common mistake. The system will not work without the CPU power connector plugged in. It is either a 4-pin or 8-pin connector located near the CPU socket.
CPU is installed properly.

Power supply is connected via 24P main power connecter. (does it need another cable?)

Does it matter if the ram is in the Dimm_A1/Dimm_A2 or Dimm_B1/Dimm_B2?

(The last time i built a computer a pentium III was "top of the line")