built in standoffs?

[To_War_We_Go]

I received all my parts today and set about building my first ever pc in my dads old case, and was watching a guide on putting the mobo in, when I noticed that my case has these raised parts where you would put the mobo in.
Here is my case:
Thermaltake VL80001W2Z ATX Mid Tower Case
https://au.pcpartpicker.com/product/YtTmP6/thermaltake-case-vl80001w2z
Are these built in standoffs or what???

 

[Belphegore]

Yes it is, most modern cases come with built in standoffs.

 

[To_War_We_Go]

thanks for the quick reply, and thanks for putting my mind at rest!!!

 

[mbarnes86]

Hi

You must check that the standoffs are only located at locations where there is a hole in the motherboard.
If the standoff touches the bottom of the motherboard where there is no mounting hole you can destroy the motherboard.

An easy way to check is to rest the motherboard on a sheet of paper and use a pencil or a nail to mark the paper at each screw hole.
then transfer the paper to the case

frequently cases have standoffs at a few locations where all size motherboard will expect them and loose ones to be added as required


regards
Mike Barnes