Built my new pc but no display on monitors

[LeonelFreak]

https://pcpartpicker.com/list/wyrXQV Those are the parts on my new pc that I built. It was more of an upgrade so same power supply, case, CD drive etc. Those were just the new parts. After installing everything nothing popped up on my screen. Any suggestions before worrying about something bad happening to one of the parts? The build went smoothly and no bad sounds when starting up.

 

[lumineZ]

I am not familiar with Ryzen systems but from what I have read and seen in here the Ryzen is pretty picky when it comes to RAM.

Besides that, take the GPU out and put it back in again, just to make sure the GPU is seated all the way and correct in the PCIe slot.


Edit:

And ofc I forgot to mention this:
If that does not work. Try a different PCIe slot.

 

[R_1]

OCD making me ask, the monitor is connected to the 1060 not the motherboard?
do you have a speaker connected to the front panel headers diagnostic speaker port labeled SPK, SPKR, SPEAK or similar?

 

[LeonelFreak]

[No message]

 

[LeonelFreak]

OCD making me ask, the monitor is connected to the 1060 not the motherboard?
do you have a speaker connected to the front panel headers diagnostic speaker port labeled SPK, SPKR, SPEAK or similar?

I removed the speaker thing and still nothing. Turns out I have 2 debug lights on gpu and ram. Returned gpu for new one and same lights. Thinking it's a ram incompatibility peoblem. Turns out ryzen builds are picky af. Not sure ehat to get now

 

[R_1]

Will the system boot with one stick of RAM?
put speaker back if you removed it. remove all the RAM and try to boot. the motherboard should beep at you like mad. you will be triggering an error code to play through the speaker. the time of the beeps and the sequence will tell you what issue is. my no Ram beep code is 3 short beeps pause 3 short beeps pause, rinse and repeat.

 

[LeonelFreak]

Will the system boot with one stick of RAM?
put speaker back if you removed it. remove all the RAM and try to boot. the motherboard should beep at you like mad. you will be triggering an error code to play through the speaker. the time of the beeps and the sequence will tell you what issue is. my no Ram beep code is 3 short beeps pause 3 short beeps pause, rinse and repeat.

It doesn't boot up at all. Just a full black screen with the 2 codes of cpu/ram on the motherboard that I checked in the manual. I'll try installing the sound again and seeing if it beeps anything at me.

 

[LeonelFreak]

Will the system boot with one stick of RAM?
put speaker back if you removed it. remove all the RAM and try to boot. the motherboard should beep at you like mad. you will be triggering an error code to play through the speaker. the time of the beeps and the sequence will tell you what issue is. my no Ram beep code is 3 short beeps pause 3 short beeps pause, rinse and repeat.

None of that worked. It doesn't beep at all. And I did place the speaker back in. Tried different slots and all.

 

[R_1]

if you cannot force a beep code the motherboard is gone, in my experience.
Ryzen is RAM picky but the board should still beep with no RAM installed. I think the motherboard need replacing.

 

[helpstar]

Which power supply are you using? Brand and model please.

8pin ATX12V/EPS power plug connected and not just one 4pin?

6Pin PCIe connector plugged into the graphics card?

 

[LeonelFreak]

if you cannot force a beep code the motherboard is gone, in my experience.
Ryzen is RAM picky but the board should still beep with no RAM installed. I think the motherboard need replacing.

I've had the same issue on 2 separate motherboards though, and both if them didn't beep. So I doubt that might be an issue. I'm really leaning against my stupid ram