Buying new graphics card

[HakanSixx]

Hi, i have a pc with AMD A8-6600k CPU and integrated radeon hd 8570d. Im wanting to get the r7 260x and i dont know if itll cause any problems and if possible what are the benchmarks id be getting for those who have the same specs.

Current PC Specs
CPU: A8 6600K
GPU: Radeon Hd 8570D
PSU: 500W something something
RAM : 8GB

 

[mdsiu]

It won't have any problems, it just won't utilize the on-die graphics. You can buy either HD 6670 or HD 6570 if you want to run crossfire with the on-die graphics.

 

[sizzling]

My only concern is if your PSU is a cheap low quality unit. What exact make and model is it?

 

[mdsiu]

A 500w PSU even running at 60% efficient will be more than enough power. That card's power draw is rated at 115 W maximum.

 

[sizzling]

And some junk PSU's which claim to be 500w cant deliver 350w and are a hazard. Putting any kind of load on them can kill them, might not be straight away but give it a few months and pop they go

 

[mdsiu]

He's talking about a max load of about 250w. It won't be pushing the PSU at all.

 

[sizzling]

If its a junk PSU I would not risk it. I know its a low power setup but a junk PSU is a risk without a gpu added

 

[mdsiu]

I think if you haven't had any issues with the PSU to this point, adding the GPU won't make much difference. But, find out what the PSU model is and let us know if you want more advice. If it is a built in unit that came with the computer case - it can be hit or miss.

 

[HakanSixx]

My only concern is if your PSU is a cheap low quality unit. What exact make and model is it?

I cant really tell, because there wasnt an exact make written when i was buying the pre-built desktop.

 

[HakanSixx]

I think if you haven't had any issues with the PSU to this point, adding the GPU won't make much difference. But, find out what the PSU model is and let us know if you want more advice. If it is a built in unit that came with the computer case - it can be hit or miss.

I cant really tell, because there wasnt an exact make written when i was buying the pre-built desktop.

 

[mdsiu]

There are usually 4 screws on the back of the PSU holding it in place in the computer case. Disconnect the power cable from the PSU, then unscrew the 4 screws. You should be able to slide the PSU out and read the make and model.

Again, this is only if you want to find out. You don't need to worry about the PSU in my opinion - I think you're gonna be fine with what you have.

 

[sizzling]

I do agree the odds are probably in your favour regarding the PSU but just encase it is a pile of junk its worth checking. The risk if it goes pop is serious.