Cable adapter or new PSU?

[Mike_Elias]

I bought a new pc but the PSU lacks ATX12V connector.
Will a PCie to ATX12V cable adapter do the trick or should I just get a new PSU?
The board is ASrock H87 pro4

 

[DiaSin]

I would get a new PSU. If that one is short on connectors it also will be short on power output. I would not trust it.

 

[Mike_Elias]

the PSU is OCZ-CXS500W if that makes any difference

 

[Onus]

If the PSU doesn't have the CPU power connector, it's an ancient unit that, if not overrated, will not have its outputs weighted (heavy on +12V, lighter elsewhere) for a modern PC; unfit for purpose.
Go to http://www.extreme.outervision.com/psucalculatorlite.jsp to figure out the capacity you need. Most likely, 500W-550W will be sufficient.

 

[Mike_Elias]

Nevermind 😀 I'm just paranoid. The PSU comes with 4+4 pins, which can be connected toghether and then they fit into to 8 pin on the board. Works fine, just posting this from the PC

 

[Onus]

Ok, you should be good to go.