Cable management help..

[Casper Traberg-Larsen]

I'm planning to get a windowed case side + LEDs so i want my computer to look SUPER clean and tight. But there is so many cables. How do i make this look good? oO

The hardest thing is under the GPU - the cables from the PSU to GPU and Molex (HDD's) are so messy...

 

[ninja85a]

go to your local computer shop and ask them to do some cable management for you

 

[Casper Traberg-Larsen]

Start by disconnecting everything, and pulling all the cables out. Then, route and reattach cables in groups. For example, route all the cables that power the drives, and the CPU, and then use cable ties to tidy them up. Next, route the signal cables to all the drives, and tidy those up with cable ties. Finally route the GPU cables, and tidy them up with more ties. Don't cinch the cable ties too tightly, and make sure that using the ties doesn't cause the cable to be so tight that they put stress on the ends. There should be a little play on each end of each cable. Once everything is neat and tidy, carefully snip the excess length from the cable ties, being careful not to cut any wires. It's all a matter of being patient, organized, and, well, a little OCD.

I will try following your guide! Thanks