[SOLVED] Can’t get post

[hunter15r]

Recently started my first build. After building everything i go to power on the pc and it doesn’t post. Won’t beep or anything. I have tried multiple different types of cables HDMI, VGA. Nothing works. At this point it’s out of the case and only has the bare minimum on it for trouble shooting. Still can’t get it to do anything.

Board - (ASUS prime B350 pluse)
CPU - (AMD Ryzen 7 2700)
RAM - (Corsair Vengance 2x8gb)
PSU - (evens 650 G+)
Memory- (Kingston 120gb sad)

P.s I only intend on the Kingston to be my boot drive. I have a 2 terabyte hard drive for storage.

Any insight on this would be greatly appreciated.

 

[CountMike]

Don't you have a dedicated GPU card ? That Ryzen doesn't have an IGPU.
Another also possible problem, B350 chipset MBs may not be compatible with 2nd gen Ryzen without a BIO update.

 

[hunter15r]

GPU -(evega gtx 960)
I am going to request a boot kit from AMD so I can update the bios. Is that the only problem going on?

 

[hunter15r]

Thank you that was the problem got it up and going.