Can I build a pc on my own

[pa1kumarpa98628123]

Can I build a pc on my own even if I had no experience, if yes then what are the precautions I have to take care, are there any advices

 

[jojesa]

Yes you can, is not that hard...
Take a look at these videos
-https://www.youtube.com/watch?v=k1Q8ksRI1Eo
-https://www.youtube.com/watch?v=gHAelSOF6f0

If you have any questions just ask here.

 

[R_1]

yes you can. a few precautions and some homework and you'll be computing in no time.
do you have an idea of the build? have you done any homework - ID'ing ports and connections? watched any videos on building a PC on youtube? read any manuals? what is the budget?

Assembly and grounding:
plug in the power supply to the wall. you can touch an unpainted part of the PSU (insert an unpainted unfinished screw into the PSU mounting holes and touch the screw as a grounding point) once you have grounded yourself you can now touch and assemble the parts of the PC.
if you move your feet, or shuffle in your chair, reground yourself again.
install the CPU into the motherboard and the RAM into the slots.
if you move your feet, or shuffle in your chair, reground yourself again.
install the cooler to the CPU. install the motherboard into the case.
secure the motherboard down with the screws, make sure you remove any unwanted/needed mounts before securing the motherboard.
unplug the PSU and ground yourself again. install the PSU into the case and secure with the 4 mounting screws.
plug in the power cord and ground yourself again from now on after grounding, unplug the power supply cord from the wall.
if you move your feet, or shuffle in your chair, plug in the cord, reground yourself and unplug again.
connect the power supply to the motherboard by the 24 pin and the AUX CPU power connector, install the GPU if one is selected, and install the drives with the supplied mounts in the case. connect the front panel connections to the case according to the manuals.
if you move your feet, or shuffle in your chair, plug in the cord, reground yourself and unplug again.
if there are any other peripherals, like wifi cards or sound card install and secure now. verify all power cables are connected to the motherboard and the GPU if needed.
the system can now be booted and the BIOS adjusted if needed (refer to motherboard manual) then an OS installed. when you are sure the system will need no more working/tinkering you can install the side panel and close the case. you have now assembled a PC.
end canned rant