Question Can I get someone to verify a new build

[RCSea]

I'm hoping someone can verify that my Mobo/CPU/RAM are all compatible for a new simple server build. This is all probably overkill for it's intended use but the total cost is well within my budget for replacing my old 2005 server guts (dead cpu).

The motherboard specs say:

• Single Socket H4 (LGA 1151) supports:
• Intel® Xeon® processor E3-1200 v5, Intel® 6th Gen Core™ i7/i5/i3, Intel® Pentium®, Intel® Celeron® processors
• CPU TDP up to 95W
• 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit, 288-pin (UDIMM) gold-plated DIMMs up to 16GB each

Motherboard: SUPERMICRO MBD-X11SAE-O ATX Server Motherboard LGA 1151 Intel C236

https://www.newegg.com/supermicro-m...n-core-i7-i5-i3-series-proc/p/N82E16813182984

CPU: Intel Core i5-6600 Skylake Quad-Core 3.3 GHz LGA 1151 65W BX80662I56600 Intel HD Graphics 530

https://www.newegg.com/intel-core-i5-6th-gen-core-i5-6600/p/N82E16819117562?Item=9SIA85V4RT1833

MEM: SAMSUNG 16GB 288-Pin DDR4 SDRAM Registered DDR4 2400 (PC4 19200) Memory (Server Memory) Model M393A2K40BB1-CRC

https://www.newegg.com/samsung-16gb-288-pin-ddr4-sdram/p/N82E16820147575?Item=9SIA7S694E9093

Thanks!

 

[Wolfshadw]

Motherboard Specs Page

I don't see any "gotchas" here, so I think you're good to go.

6th Gen Processor so a BIOS update isn't needed​

Processor is under the 95 watt TDP limit​

RAM Speed is supported​

Motherboard supports ECC/Non-ECC RAM.​

​

-Wolf sends

 

[Fix_that_Glitch]

https://store.supermicro.com/memory/16gb-ddr4-2400-mem-dr416l-hv01-eu24.html?utm=testedbutton this is the only qvl memory listed by the motherboard maker at 16gb. I am not saying yours won't work, just giving you info.

 

[RCSea]

https://store.supermicro.com/memory/16gb-ddr4-2400-mem-dr416l-hv01-eu24.html?utm=testedbutton this is the only qvl memory listed by the motherboard maker at 16gb. I am not saying yours won't work, just giving you info.

OK, good to know. I have a feeling that was never tested, so I guess I will find out. Seems like it should work fine, as I will not be doing any overclocking on this build.

 

[RCSea]

Motherboard Specs Page

I don't see any "gotchas" here, so I think you're good to go.

6th Gen Processor so a BIOS update isn't needed​

Processor is under the 95 watt TDP limit​

RAM Speed is supported​

Motherboard supports ECC/Non-ECC RAM.​

​

-Wolf sends

Cool beans. I know this is a boring build but I will post the results when I have it assembled for anyone who is thinking about a similar basic build.