Stock this thing only has 2 120mm fans. They are 1.5 amp but they sounds absolutely aweful at even half load and don't cool much better than idle. I have an i9 and 3090 I need more cooling.
I removed the front fan and replaced with 2 noctua 120mm at 1.68w*.14amps on a splitter.
Now I have added 2x80mm noctua to the door to vent heat coming off the gpu straight out of the case. They are .96w*.08 amp.
Currently the remaining stock fan is on top case, and cpu pump is on pump. The 2*120 are on the front header. The only header left is CPU.
I plan to replace the remaining stock fan with 2x120 noctua in push pull to reduce noise. My CPU temps are good but GPU is hot.
I was thinking to put all 4 noctua exhaust on the top fan header so that all exhaust are throttled similarly, but is this advisable given the different wattage? Should I just use the CPU fan header for the 2*80mm? ( Or put push/pull 120s on CPU, and let the side fans use top header? Please help.
Thanks!
I removed the front fan and replaced with 2 noctua 120mm at 1.68w*.14amps on a splitter.
Now I have added 2x80mm noctua to the door to vent heat coming off the gpu straight out of the case. They are .96w*.08 amp.
Currently the remaining stock fan is on top case, and cpu pump is on pump. The 2*120 are on the front header. The only header left is CPU.
I plan to replace the remaining stock fan with 2x120 noctua in push pull to reduce noise. My CPU temps are good but GPU is hot.
I was thinking to put all 4 noctua exhaust on the top fan header so that all exhaust are throttled similarly, but is this advisable given the different wattage? Should I just use the CPU fan header for the 2*80mm? ( Or put push/pull 120s on CPU, and let the side fans use top header? Please help.
Thanks!