Can I run 3 corsair psus

[zippycar]

Having no idea and concerned that I may be under powered. I have x6 1080ti cards and x1 1000PSU another 750 PSU and another 650 PSU. My question is= Will I ah heck up my system if I run all three PSUs? Why do I only have 1 1000psu? I couldn't buy any others from anywhere.

 

[CountMike]

Just have to make sure they all start at same time, there are 24 pin adapters for that.

 

[zippycar]

Just have to make sure they all start at same time, there are 24 pin adapters for that.

Many thanks Mike, Funny enough I Just received your message as I was about to connect all 3. I have only managed today to get my hands on another 1000Watt so my plan is to run x2 1000 with 3 cards on each then motherboard & Rises and Fans on a 650 Watt. Do you think that sounds about right? I will NOT connect anything and run it right now, I will await your advise. If it all blows up, I know who to complain to hahaha. Thanks again.

 

[CountMike]

You are going to need something like this: https://www.amazon.com/Multiple-Adapter-Connector-Genetek-Electric/dp/B0711WX9MC

 

[zippycar]

Okay Mike thank you. I have just booted with x2 1000 and both PSUs start as do all cards,however, after a few moments both PSUs stop as do all GPUs (GPU lights remain on so there must be power going through). I then get the message "power save mode". All appears to be connected correctly so I am at a bit of a loss at the moment.

 

[CountMike]

Lack of power wouldn't be reason for "power save mode", could be something with OS or drivers.

 

[zippycar]

Yes thanks Mike, I think I may try and install each GPU separately with the respected drivers and fiddle around with Win10 as I have not done either of those things. I only installed 1 GPU driver via Nvidia Geforce.

 

[zippycar]

I am back. Okay Mike I am waiting on the unit you recommended for the PSUS so at the moment I am in limbo. My plan: Run, Risers/MBoard and Fans off a 650 PSU. Next, run 3 1080ti off x1 1000 Watt PSU and the other 3 1080ti off the other 1000 Watt PSU.
PROBLEM: I have been reading and reading some more and I am getting mixed messages with some people commenting that you, (I), everyone, should not split the Risers from the main PSU, in otherwords I should run all 6 risers and 6 cards from the same PSU. I find that a little odd? Any thoughts on my plan of set up? Oh I also purchased a triple splitter for the hell of it.