Can I use the MOBO Box to try if my pc is funtional ?

[SUP3R_FIGHT3R]

Hello guys, how are you ? So i didn't buy the Case yet. But i have the rest of components. MY QUESTION is : can i use the mobo Box as a testing case ? To make sure all my components are functional ? Thanks

 

[Grugbug]

I've used a mobo box before with no issues, gl and have fun.

 

[Th3pwn3r]

Yes, you can just be careful!

 

[SUP3R_FIGHT3R]

Thanks guys, even with the GPU, and HDD ? I don't know where to put the HDD !
Thanks guys

 

[Grugbug]

Throw the GPU in if you wish. I laid my bare HDD on the table as I tested.

 

[Th3pwn3r]

Thanks guys, even with the GPU, and HDD ? I don't know where to put the HDD !
Thanks guys

You can just lay the HDD somewhere it's not going to short anything.

 

[SUP3R_FIGHT3R]

No need to install the GPU for test ?
Thanks

 

[Th3pwn3r]

Yes, install your GPU if you want. Use onboard video if you want, either way it'll be fine as long as you're careful.

 

[SUP3R_FIGHT3R]

What mistakes can be done ?
so can avoid them !

 

[Th3pwn3r]

Touching the boards or spilling liquids on them, stepping on them or dropping things. Cases do a good job at protecting against most dangers.

 

[SUP3R_FIGHT3R]

How touching boards ? Should i use those antistatic strips ?
I don't have one actually !
Thanks

 

[Th3pwn3r]

How touching boards ? Should i use those antistatic strips ?
I don't have one actually !
Thanks

You can discharge your static electricity by touching something steel and then you should be good to go. Try touching a faucet in your house and make sure you're not in your socks and on carpet when you're doing this.